Hydrogen generation by alcohol reforming in a tandem cell consisting of a coupled fuel cell and electrolyser

被引:8
|
作者
Zakaria, Khalid [1 ]
Thimmappa, Ravikumar [1 ]
Mamlouk, Mohamed [1 ]
Scott, Keith [1 ]
机构
[1] Newcastle Univ, Sch Engn, Newcastle Upon Tyne NE1 7RU, Tyne & Wear, England
基金
英国工程与自然科学研究理事会;
关键词
Hydrogen; Electro-reforming; Alcohol fuel cell; Methanol; Ethanol; Glycerol; ELECTROCATALYTIC OXIDATION; WATER SOLUTIONS; FORMIC-ACID; MEMBRANE; METHANOL; GLYCEROL; ETHANOL; CATALYSTS; PT/C; PD;
D O I
10.1016/j.ijhydene.2020.01.123
中图分类号
O64 [物理化学(理论化学)、化学物理学];
学科分类号
070304 ; 081704 ;
摘要
The performance of a novel electro-reformer for the production of hydrogen by electroreforming alcohols (methanol, ethanol and glycerol) without an external electrical energy input is described. This tandem cell consists of an alcohol fuel cell coupled directly to an alcohol reformer, negating the requirement for external electricity supply and thus reducing the cost of operation and installation. The tandem cell uses a polymer electrolyte membrane (PEM) based fuel cell and electrolyser. At 80 degrees C, hydrogen was generated from methanol, by the tandem PEM cell, at current densities above 200 mA cm(-2), without using an external electricity supply. At this condition the electro-reformer voltage was 0.32 V at an energy input (supplied by the fuel cell component) of 0.91 kWh/Nm(3); i.e. less than 20% of the theoretical value for hydrogen generation by water electrolysis (4.7 kWh/Nm(3)) with zero electrical energy input from any external power source. The hydrogen generation rate was 6.2 x 10(-4) mol (H-2) h(-1). The hydrogen production rate of the tandem cell with ethanol and glycerol was approximately an order of magnitude lower, than that with methanol. (C) 2020 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved.
引用
收藏
页码:8107 / 8117
页数:11
相关论文
共 50 条
  • [1] Reforming catalysts for hydrogen generation in fuel cell applications
    Cheekatamarla, Praveen K.
    Finnerty, C. M.
    [J]. JOURNAL OF POWER SOURCES, 2006, 160 (01) : 490 - 499
  • [2] Hydrogen generation from methanol reforming for fuel cell applications: A review
    Sun, Zhao
    Sun, Zhi-qiang
    [J]. JOURNAL OF CENTRAL SOUTH UNIVERSITY, 2020, 27 (04) : 1074 - 1103
  • [3] FUEL 29-Hydrogen generation by catalytic reforming of motor oils in an integrated fuel cell processor
    Lin, Kuen-Song
    Wu, K-J.
    Yeh, C-T.
    Shen, C-C.
    [J]. ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY, 2007, 234
  • [4] Reforming of natural gas -: hydrogen generation for small scale stationary fuel cell systems
    Heinzel, A
    Vogel, B
    Hübner, P
    [J]. JOURNAL OF POWER SOURCES, 2002, 105 (02) : 202 - 207
  • [5] Hydrogen generation via fuel reforming
    Krebs, JF
    [J]. HYDROGEN IN MATERIALS AND VACUUM SYSTEMS, 2003, 671 : 101 - 110
  • [6] Steam reforming of ethanol over Ni/support catalysts for generation of hydrogen for fuel cell applications
    Denis, Andrzej
    Grzegorczyk, Wieslaw
    Gac, Wojciech
    Machocki, Andrzej
    [J]. CATALYSIS TODAY, 2008, 137 (2-4) : 453 - 459
  • [7] Autothermal methanol reforming for hydrogen production in fuel cell applications
    Geissler, K
    Newson, E
    Vogel, F
    Truong, TB
    Hottinger, P
    Wokaun, A
    [J]. PHYSICAL CHEMISTRY CHEMICAL PHYSICS, 2001, 3 (03) : 289 - 293
  • [8] In situ hydrogen utilization in an internal reforming methanol fuel cell
    Avgouropoulos, George
    Paxinou, Alexandra
    Neophytides, Stylianos
    [J]. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 2014, 39 (31) : 18103 - 18108
  • [9] Hydrogen generation in a downdraft moving bed gasifier coupled to a molten carbonate fuel cell
    Godinez, C.
    Hernandez-Fernandez, F. J.
    de los Rios, A. P.
    Lozano, L. J.
    Illan, D.
    [J]. CHEMICAL ENGINEERING RESEARCH & DESIGN, 2012, 90 (05): : 690 - 695
  • [10] A new approach to empirical electrical modelling of a fuel cell, an electrolyser or a regenerative fuel cell
    Busquet, S
    Hubert, CE
    Labbé, J
    Mayer, D
    Metkemeijer, R
    [J]. JOURNAL OF POWER SOURCES, 2004, 134 (01) : 41 - 48