Hydrodesulfurization of 4,6-Dimethyldibenzothiophene and the Diesel Oil Fraction on NiMo Catalysts Supported over Proton-Exchanged AlMCM-41 and TiMCM-41 Extrudates

NiMo catalysts supported on mesoporous MCM-41 type materials shaped with binder were tested for activity in the hydrodesulfurization of 4,6-dimethyldibenzothiophene (4,6-DMDBT) and the diesel fuel fraction (0.92 wt% of sulfur). The aim of the investigation was to evaluate the effect of ion exchange with protons of Al- or Ti-substituted MCM-41 mesoporous supports. The subjected catalytic systems were NiMo/HAlMCM-41 and NiMo/HTiMCM-41, and for comparison purposes NiMo/AlMCM-41 and NiMo/TiMCM-41. The samples were characterized by N-2 sorption (at 77 K), XRD, TEM, XPS, SEM and Py-IR. It was found that the functionalization of AlMCM-41 and TiMCM-41 with protons increased the conversion of 4,6-DMDBT and the pseudo-first-order rate constant. Correspondingly, 4,6-DMDBT HDS reactions over the NiMo/HTiMCM-41 catalyst proceeded to a similar extent via hydrogenation and direct desulfurization, whereas over the NiMo/HAlMCM-41 they proceeded mainly via direct desulfurization. Furthermore, the ion-exchanged catalysts displayed two-fold higher efficiency in direct desulfurization than their non-modified counterparts. The NiMo/HTiMCM-41 catalyst exhibited the highest catalytic efficiency in the HDS of 4,6-DMDBT and the diesel oil fraction. The high activity of the NiMo/HTiMCM-41 catalyst is mainly attributed to its appropriate acidity, as well as the metal-support interaction providing both the high dispersion of the active phase and the desirable multilayered stacking morphology of the active phase slabs.