Characterization of Polylactic Acid Parts Produced Using the Fused Deposition Modelling

被引：9

作者：

Zile, E. ^{[1
]}

Zeleniakiene, D. ^{[2
]}

Aniskevich, A. ^{[1
]}

机构：

[1] Univ Latvia, Inst Mech Mat, LV-1004 Riga, Latvia

[2] Kaunas Univ Technol, Dept Mech Engn, Kaunas, Lithuania

来源：

MECHANICS OF COMPOSITE MATERIALS | 2022年 / 58卷 / 02期

关键词：

fused deposition modelling; laminate; voids; fiber; MECHANICAL-PROPERTIES;

D O I：

10.1007/s11029-022-10021-6

中图分类号：

O3 [力学];

学科分类号：

08 ; 0801 ;

摘要：

This work is devoted to studying the mechanical behavior of a polylactic acid (PLA) material produced by the fused deposition modelling. The influence of mesostructure on their macro-scale mechanical properties is characterized by porosity. The dependence of its longitudinal and transverse properties on the porosity is found experimentally. It is shown that, due to the crystallization after melting and extrusion, the properties of a single PLA fiber increase in time. The results obtained show that the classical lamination theory and the Tsai-Hill failure criterion can predict the modulus and strength of PLA printed materials.

引用

页码：169 / 180

页数：12

共 50 条

[1] Characterization of Polylactic Acid Parts Produced Using the Fused Deposition Modelling
E. Zīle
D. Zeleniakiene
A. Aniskevich
Mechanics of Composite Materials, 2022, 58 : 169 - 180
[2] Mechanical characterisation of a bamboo fibre/polylactic acid composite produced by fused deposition modelling
Taborda-Rios, July A.
Lopez-Botello, Omar
Zambrano-Robledo, Patricia
Reyes-Osorio, Luis A.
Garza, Carlos
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES, 2020, 39 (23-24) : 932 - 944
[3] Improving the ductility of polylactic acid parts produced by fused deposition modeling through polyhydroxyalkanoate additions
Kaygusuz, Burcin
Ozerinc, Sezer
JOURNAL OF APPLIED POLYMER SCIENCE, 2019, 136 (43)
[4] A comprehensive review on fused deposition modelling of polylactic acid
Sandanamsamy, L.
Harun, W. S. W.
Ishak, I.
Romlay, F. R. M.
Kadirgama, K.
Ramasamy, D.
Idris, S. R. A.
Tsumori, F.
PROGRESS IN ADDITIVE MANUFACTURING, 2023, 8 (05) : 775 - 799
[5] A comprehensive review on fused deposition modelling of polylactic acid
L. Sandanamsamy
W. S. W. Harun
I. Ishak
F. R. M. Romlay
K. Kadirgama
D. Ramasamy
S. R. A. Idris
F. Tsumori
Progress in Additive Manufacturing, 2023, 8 : 775 - 799
[6] A Method for Predicting Surface Finish of Polylactic Acid Parts Printed Using Fused Deposition Modeling
Huang, Meifa
Jin, Shangkun
Tang, Zhemin
Chen, Yuanqing
Qin, Yuchu
PROCESSES, 2023, 11 (06)
[7] Process parameter optimisation and characterisation of fused deposition modelling-polylactic acid (FDM-PLA) parts
Chowdhury, Sagnik
Mandal, Abhishek
Banik, Abhijit
PLASTICS RUBBER AND COMPOSITES, 2024,
[8] Modelling and estimation of tensile behaviour of polylactic acid parts manufactured by fused deposition modelling using finite element analysis and knowledge-based library
Zhou, Xunfei
Hsieh, Sheng-Jen
Ting, Chen-Ching
VIRTUAL AND PHYSICAL PROTOTYPING, 2018, 13 (03) : 177 - 190
[9] In-process thermal treatment of polylactic acid in fused deposition modelling
Harris, Muhammad
Potgieter, Johan
Archer, Richard
Arif, Khalid Mahmood
MATERIALS AND MANUFACTURING PROCESSES, 2019, 34 (06) : 701 - 713
[10] An Investigation on the Hardness of Polylactic Acid Parts Fabricated via Fused Deposition Modeling
Zeng, Yu-Shan
Hsueh, Ming-Hsien
Lai, Chao-Jung
Hsiao, Te-Ching
Pan, Chieh-Yu
Huang, Wen-Chen
Chang, Chih-Hao
Wang, Shi-Hao
POLYMERS, 2022, 14 (14)

← 1 2 3 4 5 →