The single-slip hypothesis revisited: Crystal-preferred orientations of sheared quartz aggregates with increasing strain in nature and numerical simulation
被引:25
|
作者:
Keller, L. M.
论文数: 0引用数: 0
h-index: 0
机构:
EMPA, Lab High Performance Ceram, CH-8400 Dubendorf, SwitzerlandEMPA, Lab High Performance Ceram, CH-8400 Dubendorf, Switzerland
Keller, L. M.
[1
]
Stipp, M.
论文数: 0引用数: 0
h-index: 0
机构:
Kiel Univ IFM GEOMAR, Leibniz Inst Marine Sci, Kiel, GermanyEMPA, Lab High Performance Ceram, CH-8400 Dubendorf, Switzerland
Stipp, M.
[2
]
机构:
[1] EMPA, Lab High Performance Ceram, CH-8400 Dubendorf, Switzerland
This study discusses the fabric development in naturally sheared quartz aggregates in comparison to results from texture modeling according to the polycrystalline plasticity theory with particular emphasis on the formation of a single c-axis maximum. The investigated natural shear zone samples were deformed at about 650 +/- 50 degrees C with increasing strain up to gamma approximate to 14 and show dynamic recrystallization microstructures of grain boundary migration recrystallization. Neutron diffraction texture analysis results in c-axis pole figures with a single maximum at the periphery of the pole figure. This maximum does not align with the shear plane normal towards higher strain, but rotates towards an inclined orientation in accordance with the sense of shear. Such a rotation is inconsistent with the single-slip hypothesis and suggests that the formation of this c-axis pattern is controlled by multi-slip on several slip systems. Based on the polycrystalline plasticity theory, this quartz fabric can develop if combined {10 (1) over bar1}< 1 (2) over bar 10 > {r}< a >, {(1) over bar 011}< 1 (2) over bar 10 > {z}< a > and {10 (1) over bar1}< 1 (2) over bar 10 > prism < a > slip dominates and must not be related to the commonly proposed (0001)< 1 (2) over bar 10 > basal < a > slip. The multi-slip texture development is in agreement with the shear sense interpretation from the asymmetry between well-defined quartz fabrics and the foliation. For dominant (0001)(1 (2) over bar 10) basal < a > slip in quartz and gamma > 2, numerical simulations predict a single peripheral maximum perpendicular to the shear plane and two a-maxima with a similar to 30 degrees-inward position parallel to the shear plane. This simulation corresponds to naturally observed CPO patterns of quartz formed at different deformation conditions and it is in agreement with the single-slip hypothesis. Hence, our combined natural and numerical data suggest that the single-slip hypothesis is a possible explanation for a single c(0001)-maximum but not universally true. (C) 2011 Elsevier Ltd. All rights reserved.