Tribological performance of ultra-hard ceramic composite coatings obtained through the microplasma oxidation

被引：1
|
作者：
Li, Shuha [1 ,2 ]
Wang, Fuchi [2 ]
Yin, Yujun [1 ]
Yang, Runze [1 ]
Tan, Chengwen [2 ]
机构：
[1] Ordnance Engn Coll, ShiJiazhuang 050003, Hebei, Peoples R China
[2] Beijing Inst Technol, Sch Mat Sci & Engn, Beijing 100081, Peoples R China
来源：
HIGH-PERFORMANCE CERAMICS V, PTS 1 AND 2 | 2008年 / 368-372卷
关键词：
ceramic oxidation coatings; tribological performance; microplasma oxidation;
D O I：
10.4028/www.scientific.net/KEM.368-372.1271
中图分类号：
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
Ceramic oxidation coating of approximately 60 mu m thick was prepared on a Ly12 alloy substrate by micro-plasma oxidation in an alkali-silicate electrolytic solution. Coating thickness was measured during coating formation. The influence of current density, electrolyte temperature and inter-electrode distance on coating kinetics was investigated. Microstructure and phase compositions were analyzed. The micro-hardness of the coating was also measured. The tribological performance of the coatings was evaluated using a dry sand abrasion test. In addition, the results are compared to detonation-sprayed alumina coating.
引用
收藏
页码：1271 / +
页数：2
相关论文
共 50 条
  • [1] The tribological performance of ultra-hard ceramic composite coatings obtained through microarc oxidation
    Krishna, LR
    Somaraju, KRC
    Sundararajan, G
    SURFACE & COATINGS TECHNOLOGY, 2003, 163 : 484 - 490
  • [2] Ultra-hard ceramic coatings fabricated through microarc oxidation on aluminium alloy
    Wu, HH
    Wang, HB
    Long, BY
    Long, BH
    Jin, ZS
    Wang, ND
    Yu, FG
    Bi, DM
    APPLIED SURFACE SCIENCE, 2005, 252 (05) : 1545 - 1552
  • [3] Study on the tribological performance of ceramic coatings on titanium alloy surfaces obtained through microarc oxidation
    Fei, Chen
    Hai, Zhou
    Chen, Chen
    Xia Yangjian
    PROGRESS IN ORGANIC COATINGS, 2009, 64 (2-3) : 264 - 267
  • [4] Tribological Performance of Ceramic Composite Coatings Obtained by Microarc Oxidation on 2A06 Aluminum Alloy
    Li Shuhua
    Shen Dawei
    Zu Yuanyuan
    Qu Changzheng
    Wang Fuchi
    Feng Shunshan
    RARE METAL MATERIALS AND ENGINEERING, 2014, 43 (01) : 154 - 157
  • [5] Ultra-hard Ti-B-N coatings obtained by magnetron sputtering
    Heau, C
    Guillon, N
    Fillit, RY
    Machet, J
    SURFACE & COATINGS TECHNOLOGY, 1997, 97 (1-3): : 60 - 65
  • [6] Tribological study of nano-multilayered ultra-hard coatings based on TIB2
    Panich, N.
    Wangyao, P.
    Hannongbua, S.
    Sricharoenchai, P.
    Sun, Y.
    REVIEWS ON ADVANCED MATERIALS SCIENCE, 2006, 13 (02) : 25 - 32
  • [7] Tribological study of nano-multilayered ultra-hard coatings based on TiB2
    Metallurgy and Materials Science Research Institute, Chulalongkorn University, Phrayathai Rd., Pathumwan, Bangkok 10330, Thailand
    不详
    不详
    Rev. Adv. Mater. Sci., 2006, 2 (117-124):
  • [8] The performance of titanium composite coatings obtained through thermal spraying and microarc oxidation
    Huang, C. C.
    Li, H. M.
    Li, D. H.
    Lin, S. Y.
    COMPOSITES AND ADVANCED MATERIALS, 2021, 30
  • [9] Exploration of the microstructure space in TiAlZrN ultra-hard nanostructured coatings
    Attari, Vahid
    Cruzado, Aitor
    Arroyave, Raymundo
    ACTA MATERIALIA, 2019, 174 : 459 - 476
  • [10] SEM and SEAM study on tribological performance of metal/ceramic composite coatings
    Peng, HT
    Jin, YS
    Fang, JW
    Yin, QR
    JOURNAL OF INORGANIC MATERIALS, 2001, 16 (01) : 110 - 116
12345