The Effect of Tool Pin Shape of Friction Stir Welding (FSW) on Polypropylene

被引：2
|
作者：
Nik, Z. C. [1 ]
Ishak, M. [1 ]
Othman, N. H. [1 ]
机构：
[1] Univ Malaysia Pahang, Fac Mech Engn, Pekan 26600, Pahang, Malaysia
来源：
JOINING AND WELDING SYMPOSIUM | 2017年 / 238卷
关键词：
PROCESS PARAMETERS; STRENGTH; DESIGN;
D O I：
10.1088/1757-899X/238/1/012003
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
This experiment deals with similar joining of polypropylene (PP) with thickness of 3 mm was carried out by using friction stir welding (FSW) technique. The process parameters, rotational speed, welding speed and tilt angle were fixed of experiments. The tool geometry shapes were the main parameters which were taken into consideration. The optimum designs of tool geometry shape were determined with reference to tensile strength of the joint. During the tensile testing experiment, the results show that all fractured occurs in the heat-affected zone (HAZ) on the polypropylene (PP). Results show that the optimum design can be obtained with same rotational speed, welding speed and tilt angle.
引用
收藏
页数：7
相关论文
共 50 条
  • [1] Effect of pin tool shape on metal flow during friction stir welding
    McClure, JC
    Coronado, E
    Aloor, S
    Nowak, BM
    Murr, LE
    Nunes, AC
    [J]. TRENDS IN WELDING RESEARCH, PROCEEDINGS, 2003, : 257 - 261
  • [2] SPH Simulation of Pin Shape Influence on Material Flow in Friction Stir Welding (FSW)
    Farahbakhsh I.
    Nia B.B.
    Oterkus E.
    [J]. Journal of Peridynamics and Nonlocal Modeling, 2024, 6 (3) : 449 - 467
  • [3] Effects of Pin Shape on the Tool Plunge Stage in Friction Stir Welding
    H. Bisadi
    S. Rasaee
    M. Farahmand
    [J]. Transactions of the Indian Institute of Metals, 2014, 67 : 989 - 995
  • [4] Effects of Pin Shape on the Tool Plunge Stage in Friction Stir Welding
    Bisadi, H.
    Rasaee, S.
    Farahmand, M.
    [J]. TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2014, 67 (06) : 989 - 995
  • [5] Prediction of weld zone shape with effect of tool pin profile in friction stir welding process
    Prashant Prakash
    Ravi Shankar Anand
    Sanjay Kumar Jha
    [J]. Journal of Mechanical Science and Technology, 2020, 34 : 279 - 287
  • [6] Prediction of weld zone shape with effect of tool pin profile in friction stir welding process
    Prakash, Prashant
    Anand, Ravi Shankar
    Jha, Sanjay Kumar
    [J]. JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 2020, 34 (01) : 279 - 287
  • [7] Friction Stir Welding (FSW)
    Tohoku University, Japan
    [J]. Yosetsu Gakkai Shi, 8 (573-581): : 573 - 581
  • [8] Effect of tool geometry on friction stir spot welding of polypropylene sheets
    Bilici, M. K.
    [J]. EXPRESS POLYMER LETTERS, 2012, 6 (10): : 805 - 813
  • [9] Influence of the pin shape of the tool during friction stir welding on the process output parameters
    Akhunova, A. Kh
    Imayev, M. F.
    Valeeva, A. Kh
    [J]. LETTERS ON MATERIALS, 2019, 9 (04): : 456 - 459
  • [10] Scale effect of pin on friction stir welding
    State Key Laboratory of Structural Analysis for Industrial Equipment, Dalian University of Technology, Dalian 116024, China
    [J]. Cailiao Gongcheng, 2006, 1 (19-23+31):
12345