Design and optimization of an intensified process to produce acrylic acid as added product value from glycerol generated in the biodiesel production

被引:5
|
作者
Sanchez-Gomez, Jahaziel A. [1 ]
Cabrera-Ruiz, Julian [1 ]
Hernandez, Salvador [1 ]
机构
[1] Univ Guanajuato, Dept Ingn Quim, Campus Guanajuato,Noria Alta S-N, Guanajuato 36050, Gto, Mexico
来源
CHEMICAL ENGINEERING RESEARCH & DESIGN | 2022年 / 184卷
关键词
Reactive distillation; Crude glycerol valorization; Process simulation and optimization; Acrylic acid production; VALORIZATION; DEHYDRATION; CATALYSTS;
D O I
10.1016/j.cherd.2022.06.032
中图分类号
TQ [化学工业];
学科分类号
0817 ;
摘要
Crude glycerol has become very competitive due to its low price and its use as a platform molecule for the generation of high value-added chemical products. This work proposes a new process to produce acrylic acid from crude glycerol using intensified processes (reactive distillation schemes). An economic analysis was also carried out in relation to the total annual cost to determine the costs associated to each reactive scheme. It was determined that the proposed schemes are economically viable and represent considerable benefits such as the clear reduction in the number of processes equipment. At the same time, it has been determined that these processes can use crude glycerol as raw material to obtain acrylic acid with a purity greater than 90 % in mol. Likewise, the proposed schemes show a significant reduction in energy consumption, up to 74 %, to produce acrylic acid in contrast to previous reported works. (c) 2022 Institution of Chemical Engineers. Published by Elsevier Ltd. All rights reserved.
引用
收藏
页码:543 / 553
页数:11
相关论文
共 50 条
  • [1] Two-Step Purification of Glycerol as a Value Added by Product From the Biodiesel Production Process
    Raman, Abdul Aziz Abdul
    Tan, Hooi W.
    Buthiyappan, Archina
    FRONTIERS IN CHEMISTRY, 2019, 7
  • [2] From glycerol as the by-product of biodiesel production to value-added monoacetin by continuous and selective esterification in acetic acid
    Rastegari, Hajar
    Ghaziaskar, Hassan S.
    JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY, 2015, 21 : 856 - 861
  • [3] Optimization of compost fermentation of glycerol by-product discharged from biodiesel fuel production process
    Sadano, Yuta
    Toshimitsu, Ryota
    Kohda, Jiro
    Nakano, Yasuhisa
    Yano, Takuo
    JOURNAL OF MATERIAL CYCLES AND WASTE MANAGEMENT, 2010, 12 (04) : 308 - 313
  • [4] Optimization of compost fermentation of glycerol by-product discharged from biodiesel fuel production process
    Yuta Sadano
    Ryota Toshimitsu
    Jiro Kohda
    Yasuhisa Nakano
    Takuo Yano
    Journal of Material Cycles and Waste Management, 2010, 12 : 308 - 313
  • [5] PRODUCTION VALUE-ADDED PRODUCTS FROM BIODIESEL DERIVED CRUDE GLYCEROL
    Chiyanzu, Idan
    Somdaka, Kuthala
    Marx, Sanette
    PAPERS OF THE 23RD EUROPEAN BIOMASS CONFERENCE: SETTING THE COURSE FOR A BIOBASED ECONOMY, 2015, : 1092 - 1096
  • [6] Sustainable process design for manufacturing acrylic acid from glycerol
    Dimian, A. C.
    Bildea, C. S.
    CHEMICAL ENGINEERING RESEARCH & DESIGN, 2021, 166 : 121 - 134
  • [7] Utilization of Crude Glycerol from Biodiesel Industry for the Production of Value-Added Bioproducts
    Chozhavendhan, S.
    Kumar, R. Praveen
    Elavazhagan, S.
    Barathiraja, B.
    Jayakumar, M.
    Varjani, Sunita J.
    WASTE TO WEALTH, 2018, : 65 - 82
  • [8] Microbial Conversion of Waste Glycerol from Biodiesel Production into Value-Added Products
    Li, Cheng
    Lesnik, Keaton L.
    Liu, Hong
    ENERGIES, 2013, 6 (09): : 4739 - 4768
  • [9] Value-added use of residual glycerol from biodiesel production process via the optimized synthesis of alkyd resins
    Miran, Faiz
    Mumtaz, Muhammad Waseem
    Mukhtar, Hamid
    Danish, Muhammad
    PROCESS SAFETY AND ENVIRONMENTAL PROTECTION, 2017, 109 : 659 - 669
  • [10] Optimization of supercritical dimethyl carbonate (SCDMC) technology for the production of biodiesel and value-added glycerol carbonate
    Tan, Kok Tat
    Lee, Keat Teong
    Mohamed, Abdul Rahman
    FUEL, 2010, 89 (12) : 3833 - 3839