ITER vacuum vessel structural analysis completion during manufacturing phase

被引：8

作者：

Martinez, J. -M. ^{[1
]}

Alekseev, A. ^{[1
]}

Sborchia, C. ^{[1
]}

Choi, C. H. ^{[1
]}

Utin, Y. ^{[1
]}

Jun, C. H. ^{[1
]}

Terasawa, A. ^{[1
]}

Popova, E. ^{[1
]}

Xiang, B. ^{[1
]}

Sannazaro, G. ^{[1
]}

Lee, A. ^{[1
]}

Martin, A. ^{[1
]}

Teissier, P. ^{[1
]}

Sabourin, F. ^{[1
]}

Caixas, J. ^{[2
]}

Fernandez, E. ^{[2
]}

Zarzalejos, J. M. ^{[2
]}

Kim, H. -S. ^{[3
]}

Kim, Y. G. ^{[3
]}

Privalova, E. ^{[4
]}

Du, S. ^{[5
]}

Wang, S. ^{[5
]}

Albin, V. ^{[6
]}

Gaucher, T. ^{[6
]}

Borrelly, S. ^{[7
]}

Cambazar, M. ^{[8
]}

Sfarni, S. ^{[8
]}

机构：

[1] ITER Org, Route Vinon Verdon,CS 90046, F-13067 St Paul Les Durance, France

[2] F4E, C Josep Pla 2,Torres Diagonal Litoral,Edificio B3, E-08019 Barcelona, Spain

[3] ITER Korea, Natl Fus Res Inst, Daejeon, South Korea

[4] NTC Sintez, Efremov Inst, St Petersburg 189631, Russia

[5] Chinese Acad Sci ASIPP, Inst Plasma Phys, Hefei, Peoples R China

[6] Sogeti High Tech, RE2, 180 Rue Rene Descartes, F-13857 Aix En Provence, France

[7] SOM Calcul Grp ORTEC, 121 Ancien Chemin Cassis, F-13009 Marseille, France

[8] ZAC St Martin, Assyst EOS, 23 Rue Benjamin Franklin, F-84120 Pertuis, France

来源：

FUSION ENGINEERING AND DESIGN | 2016年 / 109卷

关键词：

ITER; Vacuum vessel; Nuclear Pressure Equipment; Structural integrity; Analysis; Manufacturing design; RCC-MR;

D O I：

10.1016/j.fusengdes.2016.02.017

中图分类号：

TL [原子能技术]; O571 [原子核物理学];

学科分类号：

0827 ; 082701 ;

摘要：

Some years ago, analyses were performed by ITER Organization Central Team (IO-CT) to verify the structural integrity of the ITER vacuum vessel baseline design fixed in 2010 and classified as a Protection Important Component (PIC). The manufacturing phase leads the ITER Organization domestic agencies (IO-DA) and their contracted manufacturers to propose detailed design improvements to optimize the manufacturing or inspection process. These design and quality inspection changes can affect the structural margins with regards to the Codes&Standards and thus oblige to evaluate one more time the modified areas. This paper proposes an overview of the additional analyses already performed to guarantee the structural integrity of the manufacturing designs. In this way, CT and DAs have been strongly involved to keep the considerable margins obtained previously which were used to fix reasonable compensatory measures for the lack of In Service Inspections of a Nuclear Pressure Equipment (NPE). (C) 2016 Elsevier B.V. All rights reserved.

引用

页码：688 / 692

页数：5

共 50 条

[1] Manufacturing completion of the first ITER vacuum vessel sector
Kim, H. S.
Moon, H. K.
Park, C. K.
Jung, Y. J.
Ha, M. S.
Park, S. H.
Joo, Y. M.
Joo, J. K.
Kang, S. G.
Seo, Y. H.
Han, J. Y.
Lim, N. J.
Yoon, B. H.
Choi, S. Y.
Hwang, H. S.
Hong, K. H.
Ahn, H. J.
Lee, Y. J.
Kim, B. C.
Lee, H. G.
Jung, K. J.
Sa, J. W.
Choi, C. H.
Chung, W. H.
Kim, H. K.
Kim, Y. G.
Kim, G. H.
Hong, Y. S.
Martinez, J. M.
Martin, A.
Jing, J.
Privalov, M.
Xiang, B.
Lobinger, F.
Pedrosa, N.
Rodilla, E.
Utin, Y.
Mestric, A.
Jung, Y. S.
Tok, J. Y. W.
Park, K. H.
Kim, H. C.
Seok, S. H.
Park, D. B.
Moon, G. H.
Lee, J. H.
Lim, K. S.
Kim, J. B.
Yeo, H. K.
Lee, J. J.
NUCLEAR FUSION, 2022, 62 (07)
[2] Completion of design and manufacturing of the iter vacuum vessel lower port extension
Jung, Yungjin
Kim, Hyun-Soo
Moon, Hokyu
Han, Juyeon
Kim, Hakkun
Sa, Jeongwoo
Hong, Yunseok
Jing, Juntao
Hwang, Sesub
Kim, Jongbae
Ham, Youngmin
Moon, Kihwan
Jeon, Junhyuk
Jang, Soohyun
Cho, Seong J.
FUSION ENGINEERING AND DESIGN, 2023, 193
[3] Structural integrity analysis for manufacturing design of the ITER vacuum vessel gravity support
Wang, Songke
Martinez, Jean-Marc
Schioler, Tyge
Tailhardat, Olivier
Le Barbier, Robin
Choi, Chang Ho
FUSION ENGINEERING AND DESIGN, 2018, 135 : 228 - 233
[4] Structural analysis for an upper port of the ITER vacuum vessel
Hong, Y. S.
Kwon, T. H.
Ahn, H. J.
Kim, Y. K.
Lee, C. D.
FUSION ENGINEERING AND DESIGN, 2007, 82 (15-24) : 1969 - 1976
[5] Structural and fracture mechanics analysis of ITER vacuum vessel
Iguchi, Masahide
Saito, Masakatsu
FUSION ENGINEERING AND DESIGN, 2007, 82 (15-24) : 2029 - 2034
[6] Demonstration tests for manufacturing the ITER vacuum vessel
Shimizu, Katsusuke
Onozuka, Masanori
Usui, Yukinori
Urata, Kazuhiro
Tsujita, Yoshihiro
Nakahira, Masataka
Takeda, Nobukazu
Kakudate, Satoshi
Ohmori, Junji
Shibanuma, Kiyoshi
FUSION ENGINEERING AND DESIGN, 2007, 82 (15-24) : 2081 - 2088
[7] Structural analysis of alternative designs for the ITER vacuum vessel and support
Hong, Yun-Seok
Ahn, Hee-Jae
Kwon, Tae-Hoon
Kim, Young-Ki
Kim, Dong-Hae
Kim, Hyun-Soo
FUSION ENGINEERING AND DESIGN, 2011, 86 (9-11) : 2021 - 2024
[8] Design and structural analysis of support structure for ITER vacuum vessel
Takeda, N
Ohmori, J
Nakahira, M
Shibanuma, K
JOURNAL OF NUCLEAR SCIENCE AND TECHNOLOGY, 2004, 41 (12) : 1280 - 1286
[9] Manufacturing preparations for the European Vacuum Vessel Sector for ITER
Jones, Lawrence
Francois Arbogast, Jean
Bayon, Angel
Bianchi, Aldo
Caixas, Joan
Facca, Aldo
Fachin, Gianbattista
Fernandez, Jose
Giraud, Benoit
Losasso, Marcello
Loewer, Thorsten
Mico, Gonzalo
Miguel Pacheco, Jose
Paoletti, Roberto
Sanguinetti, Gian Paolo
Stamos, Vassilis
Tacconelli, Massimiliano
Trentea, Alexandru
Utin, Yuri
FUSION ENGINEERING AND DESIGN, 2012, 87 (5-6) : 700 - 705
[10] ITER vacuum vessel sector manufacturing development in Europe
Jones, L
Bianchi, A
Cros, A
di Pietro, E
Giraud, B
Ioki, K
Junek, L
Parodi, B
Pick, M
Sanguinetti, GP
Tivey, R
Utin, Y
FUSION ENGINEERING AND DESIGN, 2005, 75-79 : 607 - 612

← 1 2 3 4 5 →