Oxygen transfer and power consumption in an aeration system using mist and circulation flow generated by a rotating cone

被引:9
|
作者
Adachi, Takahiro [1 ]
机构
[1] Akita Univ, Dept Mech Engn, Akita 0108502, Japan
基金
日本科学技术振兴机构;
关键词
Rotating Cone; Film Flow; Mist Flow; Dissolved Oxygen; Oxygen Mass Transfer; DIFFUSED AERATION; CONICAL SURFACE; MASS-TRANSFER; VELOCITY;
D O I
10.1016/j.ces.2015.01.009
中图分类号
TQ [化学工业];
学科分类号
0817 ;
摘要
We have experimentally found the liquid film flow characteristics rising along the outer surface of a rotating cone. When the film flow goes up fully upward, the liquid film cannot keep the filmwise condition and is eventually atomized into a mist flow. In this research, we apply the mechanism to atomize the liquid and to transport oxygen from the air to the water through the atomized water droplets, It is recognized that the mixing is effective in oxygen mass transfer, It is found that a dual effect of the mixing and mist flow by using a rotating cone increases the oxygen mas7s transfer because the mist flow has a small diameter and large surface area between liquid and gas. In addition, the flow pattern is changed from steady flow to unsteady one if the rotation rate increases further, where the oxygen mass transfer is slightly enhanced. Furthermore, a correlation between the unit volume power consumption and the oxygen mass transfer is examined and shows that the oxygen transfer increases in power law relationship with the unit volume power consumption in the case with the mist flow. (C) 2015 Elsevier Ltd. All rights reserved.
引用
收藏
页码:625 / 632
页数:8
相关论文
共 25 条
  • [1] Enhancement of Dissolved Oxygen Transfer using Circulation and Mist Flow Generated by a Rotating Cone
    Adachi, Takahiro
    [J]. KAGAKU KOGAKU RONBUNSHU, 2015, 41 (02) : 78 - 82
  • [2] Correlation of oxygen mass transfer and power consumption in an aeration system by a rotating cone
    Adachi, Takahiro
    Kubo, Toshiki
    Higashiono, Koji
    Terashima, Mitsuharu
    Takahashi, Yutaro
    [J]. CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION, 2018, 125 : 105 - 111
  • [3] Enhancement of oxygen dissolution using mist flow generated by a rotating cone
    Adachi, Takahiro
    [J]. Nihon Kikai Gakkai Ronbunshu, B Hen/Transactions of the Japan Society of Mechanical Engineers, Part B, 2013, 79 (800): : 632 - 635
  • [4] Flow and Oxygen-Transfer Characteristics in an Aeration System Using an Annular Nozzle Ejector
    Park, Sangkyoo
    Yang, Heicheon
    [J]. INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH, 2013, 52 (04) : 1756 - 1763
  • [5] Influence of Aeration Rates on Oxygen Mass Transfer and Flow- Field in a Microporous Aeration System
    Lu, Cheng
    Cheng, Wen
    Li, Zhen
    Wang, Min
    Liu, Jikai
    [J]. POLISH JOURNAL OF ENVIRONMENTAL STUDIES, 2021, 30 (04): : 3727 - 3739
  • [6] AERATION EFFICIENCY AND OXYGEN CONSUMPTION IN THE TREATMENT OF WASTEWATER FROM COFFEE FRUIT PROCESSING USING A CASCADE AERATION SYSTEM
    Matos, Antonio T.
    Eustaquio Junior, Valdeir
    de Matos, Mateus P.
    [J]. ENGENHARIA AGRICOLA, 2015, 35 (05): : 941 - 950
  • [7] Evaluation of oxygen transfer parameters of fine-bubble aeration system in plug flow aeration tank of wastewater treatment plant
    Xiaohong Zhou
    Yuanyuan Wu
    Hanchang Shi
    Yanqing Song
    [J]. Journal of Environmental Sciences., 2013, 25 (02) - 301
  • [8] Evaluation of oxygen transfer parameters of fine-bubble aeration system in plug flow aeration tank of wastewater treatment plant
    Zhou, Xiaohong
    Wu, Yuanyuan
    Shi, Hanchang
    Song, Yanqing
    [J]. JOURNAL OF ENVIRONMENTAL SCIENCES, 2013, 25 (02) : 295 - 301
  • [9] Evaluation of oxygen transfer parameters of fine-bubble aeration system in plug flow aeration tank of wastewater treatment plant
    Xiaohong Zhou
    Yuanyuan Wu
    Hanchang Shi
    Yanqing Song
    [J]. Journal of Environmental Sciences, 2013, (02) : 295 - 301
  • [10] Studies on the performance of a rotating drum bioreactor for bioleaching processes - Oxygen transfer, solids distribution and power consumption
    Jin, Jian
    Liu, Guo-Liang
    Shi, Shao-Yuan
    Cong, Wei
    [J]. HYDROMETALLURGY, 2010, 103 (1-4) : 30 - 34