Simulation of engine faults and their impact on emissions and vehicle performance for a liquefied petroleum gas taxi

被引:14
|
作者
Organ, Bruce [1 ,2 ]
Huang, Yuhan [1 ]
Zhou, John L. [1 ]
Yam, Yat-Shing [3 ]
Mok, Wai-Chun [1 ]
Chan, Edward F. C. [1 ,4 ]
机构
[1] Univ Technol Sydney, Ctr Green Technol, Sch Civil & Environm Engn, Sydney, NSW 2007, Australia
[2] Vocat Training Council, Jockey Club Heavy Vehicle Emiss Testing & Res Ctr, Hong Kong, Peoples R China
[3] Govt Hong Kong Special Adm Reg, Environm Protect Dept, Hong Kong, Peoples R China
[4] Technol & Higher Educ Inst Hong Kong, Fac Sci & Technol, Hong Kong, Peoples R China
关键词
Fault simulation; Emissions; High emitting vehicles; Inspection and maintenance; Training programmes; REAL-WORLD EMISSIONS; DIESEL; MAINTENANCE; INSPECTION; MECHANISM; TESTS;
D O I
10.1016/j.scitotenv.2020.137066
中图分类号
X [环境科学、安全科学];
学科分类号
08 ; 0830 ;
摘要
The deterioration of emissions control systems in a spark ignition engine is predominantly a gradual process of wear and tear occurring as vehicles accumulate mileage. As new innovations in engine and emissions technology have been progressively introduced to meet lower emissions targets, the impact of gradual deterioration of hardware has become more challenging to identify and quantify in the repair industry. When a pioneering emissions control programme utilising remote sensing to detect high emitting gasoline and liquefied petroleum gas (LPG) vehicles was to be introduced in Hong Kong, it became apparent the repair industry needed specialised training to assist with identifying the types of failures which would lead to high vehicle emissions. To identify the impact of hardware deterioration and failures, a Toyota Crown Comfort LPG taxi was used to demonstrate simulated failures of engine hardware systems to measure their impact on emissions, fuel consumption and drivability using a chassis dynamometer. This novel study simulated a broad range of deterioration and failures covering the intake, fuel supply, ignition, and exhaust systems. The results of the study showed significant THC and CO increases of up to 317% (0.604 g/km) and 782% (5.351 g/km) respectively fora simulated oxygen sensor high voltage fault and a sticky mixture control valve. The largest increase in NOx emissions was for restricted main fuel supply in the LPG vapouriser, producing an increase of 282% (1.41 g/km). Fuel consumption varied with increases of up to 15.5%. Drivability was impacted with poor idle from a number of faults and especially by a worn throttlebody which produced rough acceleration characteristics as well. This study clearly highlights the importance of having properly maintained emissions and engine hardware systems to achieve optimal fuel economy and compliant emissions levels, which could be reproduced in other regions for prescribed emissions regulation. (C) 2020 Elsevier B.V. All rights reserved.
引用
收藏
页数:9
相关论文
共 50 条