Experimental determination and numerical simulation of material and damage behaviour of 3D printed polyamide 12 under cyclic loading

被引：22

作者：

Schob, Daniela ^{[1
]}

Sagradov, Ilja ^{[1
]}

Roszak, Robert ^{[1
,4
]}

Sparr, Holger ^{[1
]}

Franke, Rainer ^{[1
]}

Ziegenhorn, Matthias ^{[1
]}

Kupsch, Andreas ^{[2
]}

Leonard, Fabien ^{[2
]}

Mueller, Bernd R. ^{[2
]}

Bruno, Giovanni ^{[2
,3
]}

机构：

[1] Brandenburg Univ Technol Cottbus Senftenberg, Univ Pl, D-01968 Senftenberg, Germany

[2] Bundesanstalt Mat Forsch & Prufung, BAM, Inter Eichen 87, D-12205 Berlin, Germany

[3] Univ Potsdam, Inst Phys & Astron, Karl Liebknecht Str 25, D-14476 Potsdam, Germany

[4] Poznan Univ Tech, PLM Sklodowskiej Curie 5, PL-60965 Poznan, Poland

来源：

ENGINEERING FRACTURE MECHANICS | 2020年 / 229卷

关键词：

3D printing Polyamide 12; Chaboche model; GTN model; Material and damage behaviour; X-ray refraction; computed tomography; X-RAY REFRACTION; CERAMICS; PLASTICITY; EVOLUTION; POROSITY; MODELS;

D O I：

10.1016/j.engfracmech.2019.106841

中图分类号：

O3 [力学];

学科分类号：

08 ; 0801 ;

摘要：

The material and damage behaviour of additively manufactured polyamide 12 under cyclic loading was characterized by cyclic tests and microstructure analysis by using microscopy, X-ray refraction, and computed tomography. The results were used to determine parameters for the viscoplastic material model by Chaboche and a damage model by Gurson-Tvergaard-Needleman. The temperature was monitored during the experiments and the self-heating effect was observed. By including this effect, a higher accuracy could be achieved with the results of mechanical experiments.

引用

页数：13

共 50 条

[1] Experimental determination and numerical simulation of material and damage behaviour of 3D printed polyamide 12 under quasi-static loading
Schob, D.
Roszak, R.
Sagradov, I
Sparr, H.
Ziegenhorn, M.
Kupsch, A.
Leonard, F.
Mueller, B. R.
Bruno, G.
ARCHIVES OF MECHANICS, 2019, 71 (4-5): : 507 - 526
[2] Experimental determination and numerical simulation of temperature dependent material and damage behaviour of additively manufactured polyamide 12
Roszak, R.
Schob, D.
Sagradov, I
Kotecki, K.
Sparr, H.
Maasch, Ph
Franke, R.
Ziegenhorn, M.
MECHANICS OF MATERIALS, 2021, 159
[3] 3D Numerical Modeling of a Piled Embankment under Cyclic Loading
Pham, Hung V.
Dias, Daniel
INTERNATIONAL JOURNAL OF GEOMECHANICS, 2019, 19 (04)
[4] Experimental investigation and numerical modelling of 3D printed polyamide 12 with viscoplasticity and a crack model at different strain rates
Sagradov, Ilja
Schob, Daniela
Roszak, Robert
Maasch, Philipp
Sparr, Holger
Ziegenhorn, Matthias
MATERIALS TODAY COMMUNICATIONS, 2020, 25
[5] Experimental and numerical investigation of 3D printed bio-inspired lattice structures for mechanical behaviour under Quasi static loading conditions
Chouhan, Ganesh
Gunji, Bala Murali
Bidare, Prveen
Ramakrishna, Doodi
Kumar, Ranjeet
MATERIALS TODAY COMMUNICATIONS, 2023, 35
[6] Experimental and Numerical Study on of 3D Printed Carbon Fiber Composite Cylindrical Shell Under Axial Loading
Che, Xiongjie
Xin, Ruihai
Goo, Nam Seo
INTERNATIONAL JOURNAL OF AERONAUTICAL AND SPACE SCIENCES, 2025,
[7] Shrinkage and deformation of material extrusion 3D printed parts during sintering: Numerical simulation and experimental validation
Ghantasala, Sri Bharani
Singh, Gurminder
Missiaen, Jean-Michel
Bouvard, Didier
ACTA MATERIALIA, 2025, 282
[8] Optimization of 3D printed geocells based on numerical simulation and experimental investigation
Amurane, Izidine
Zhang, Mengxi
Li, Tianyi
Jiang, Haibo
2018 INTERNATIONAL CONFERENCE ON CONSTRUCTION, AVIATION AND ENVIRONMENTAL ENGINEERING, 2019, 233
[9] The novel mechanical and recovery behaviors of 3D printed EVA under cyclic tensile loading
Luo, Shengyang
Zhang, Jianxun
MATERIALS LETTERS, 2024, 360
[10] An Experimental and Numerical Investigation of a Novel 3D Printed Sandwich Material for Motorsport Applications
Harland, Daniel
Alshaer, Ahmad W.
Brooks, Hadley
17TH NORDIC LASER MATERIALS PROCESSING CONFERENCE (NOLAMP17), 2019, 36 : 11 - 18

← 1 2 3 4 5 →