Numerical Analysis on the Hydraulic Thrust and Dynamic Response Characteristics of a Turbine Pump

Pumps as turbines are widely used in the world, wherein the hydraulic thrust of a turbine pump is one of the key factors affecting the safe and stable operation of a unit. There are a lot of difficulties to evaluate the hydraulic thrust by site observation and experiment. These difficulties can be resolved if a numerical simulation is applied. The present work aims to analyze the axial and radial hydraulic thrust of a prototype turbine pump in turbine mode, and then to determine the dynamic response characteristics of the turbine pump shafting. The axial hydraulic thrust in the turbine mode is upward, with a fluctuation range of 155 t to 175 t. The pressure fluctuation in the runner can be 16% of the unit head. The simulation results provide a good reference for understanding the hydraulic performance of the turbine pump and useful guidance for the operation of the unit. The structure analysis shows that the runner has asymmetrical deformation in the axial and radial directions. The amplitude of the dynamic stress on the shafting is about 10 MPa, and the dominant frequency of the dynamic stress on the runner is 20f(n). The results could provide guidance for the operating and optimization of the unit, which helps the safe and stable operation of the station.