Factors controlling cracking of concrete affected by reinforcement corrosion

The present payer tries to contribute to quantifying the relationship between the amount of corrosion and cover cracking. The variables studied were: cover/diameter (c/<empty set>), proportions of cement, w/c, cast position of the bar, transverse reinforcement and corrosion rate. The corrosion is accelerated by applying constant currents causing the rebar to act as an anode. The results indicate that the cracking process develops in two steps: generation and propagation. Radius losses of about 15-50 mu m are necessary to generate the first visible crack (< 0.1 mm width). The propagation follows a behaviour of the type: w (crack width in mm) = a + bx (radius loss in mu m).