Recrystallisation at intercritical annealing in low carbon steels

被引：11
|
作者：
Maruyama, N. [1 ]
Ogawa, T. [1 ]
Takahashi, M. [1 ]
机构：
[1] Nippon Steel Corp Ltd, Steel Res Labs, 20-1 Shintomi, Futtsu 2938511, Japan
来源：
RECRYSTALLIZATION AND GRAIN GROWTH III, PTS 1 AND 2 | 2007年 / 558-559卷
关键词：
low carbon steels; dual phase steels; incomplete recrystallisation; subgrain growth; recovery; intercritical annealing;
D O I：
10.4028/www.scientific.net/MSF.558-559.247
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Subgrain growth in deformed ferrite and incomplete recrystallisation during intercritical annealing in low carbon (LC) steels was investigated by EBSD and FEGTEM/EDS. It was confirmed that fine dual phase (alpha+gamma) microstructures could be obtained even without the addition of microalloying elements such as Nb and Ti, if the steels were heated above Ac-1 temperature before the completion of primary recrystallisation and then intercritically annealed. The fine microstructure was found to be mainly due to the inhibition of primary recrystallisation, and also due to the inhibition of subgrain growth in deformed matrix by finely dispersed gamma phase formed during heating. Mn segregation at alpha/gamma interfaces seems to indicate that the kinetics of boundary migration in the existence of gamma is controlled by the volume diffusion of substitutional alloying elements across the alpha/gamma interfaces.
引用
收藏
页码：247 / +
页数：2
相关论文
共 50 条
  • [1] Kinetics of austenitization during intercritical annealing in low carbon low alloy steels
    Zhengfeng, Qi
    Yan, Wang
    Jinshu Rechuli Xuebao/Transactions of Metal Heat Treatment, 1992, 13 (04):
  • [2] DEVELOPMENT OF (111) TEXTURE IN INTERCRITICAL ANNEALING OF LOW-CARBON STEELS
    HASHIMOTO, O
    SATOH, S
    TANAKA, T
    TRANSACTIONS OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1987, 27 (09) : 746 - 754
  • [3] Ferrite recrystallisation and intercritical annealing of cold-rolled low alloy medium carbon steel
    Tavakoli, Mohammad
    Mirzadeh, Hamed
    Zamani, Mehran
    MATERIALS SCIENCE AND TECHNOLOGY, 2019, 35 (16) : 1932 - 1941
  • [4] Effect of aluminium nitride precipitation on recrystallisation kinetic in low carbon batch annealing steels
    Monsalve, A
    Artigas, A
    Celentano, D
    REVISTA DE METALURGIA, 2005, 41 (05) : 340 - 350
  • [5] THE NUCLEATION AND GROWTH OF AUSTENITE DURING INTERCRITICAL ANNEALING OF LOW CARBON-MANGANESE STEELS
    THOMPSON, SW
    FAN, GS
    HOWELL, PR
    JOURNAL OF METALS, 1983, 35 (08): : A42 - A42
  • [6] Role of Nb on Microstructural Evolution during Intercritical Annealing in Low-carbon Steels
    Ogawa, Toshio
    Sato, Keiichi
    Dannoshita, Hiroyuki
    Maruoka, Kuniaki
    Ushioda, Kohsaku
    ISIJ INTERNATIONAL, 2016, 56 (12) : 2290 - 2297
  • [7] Simulation of intercritical annealing in low-alloy TRIP steels
    Katsamas, AI
    Vasilakos, AN
    Haidemenopoulos, GN
    STEEL RESEARCH, 2000, 71 (09): : 351 - 356
  • [8] Recrystallisation and dilatometric behaviour of low carbon and ultralow carbon steels
    De Cock, T.
    Capdevila, C.
    Ferrer, J. P.
    Caballero, F. G.
    Jimenez, J. A.
    Garcia de Andres, C.
    MATERIALS SCIENCE AND TECHNOLOGY, 2008, 24 (07) : 832 - 837
  • [9] THE IMPROVEMENT OF TENSILE PROPERTIES OF LOW-CARBON STEELS VIA SHORT-TIME INTERCRITICAL ANNEALING
    Mohsenzadeh, Meymanat Sadat
    ACTA METALLURGICA SLOVACA, 2023, 29 (01): : 17 - 21
  • [10] Intercritical Annealing Response of Medium Manganese Steels Having Different Carbon Concentrations
    Kang, Singon
    Hofer, Robert W.
    Speer, John G.
    Krizan, Daniel
    Matlock, David K.
    De Moor, Emmanuel
    STEEL RESEARCH INTERNATIONAL, 2018, 89 (09)
12345