Microstructure and Mechanical Properties of a Tempered High Cr Martensitic Steel

被引：3
|
作者：
Guerra-Fuentes, L. [1 ]
Hernandez-Rodriguez, M. A. L. [1 ]
Zambrano-Robledo, P. [1 ]
Salinas-Rodriguez, A. [2 ]
Garcia-Sanchez, E. [1 ]
机构：
[1] Univ Autonoma Nuevo Leon, Fac Ingn Mecan & Elect, San Nicolas De Los Garza, NL, Mexico
[2] CINVESTAV Unidad Saltillo, Ramos Arizpe, Coah, Mexico
来源：
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE | 2017年 / 26卷 / 07期
关键词：
martensitic steel; nanoindentation; tempering; TEM; DUAL-PHASE STEEL; NANOINDENTATION; TEMPERATURE; BEHAVIOR; HARDNESS;
D O I：
10.1007/s11665-017-2737-0
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Microstructural and mechanical studies have been performed in a high Cr martensitic steel Firth-Vickers (FV535) to analyze the tempering of martensite. Nanoindentation technique was used to determine the hardness and elastic modulus through systematic measurements on martensite and tempered martensite. On the other hand, microscopic studies were carried out to analyze the material in the same condition as received and subsequently observe the microstructural modifications after heat treatment. The precipitation presented in the last stage of tempering was observed by transmission electron microscopy. The results showed the effect of the martensite decomposition on the mechanical and nanomechanical properties of FV535.
引用
收藏
页码：3500 / 3506
页数：7
相关论文
共 50 条
  • [1] Microstructure and Mechanical Properties of a Tempered High Cr Martensitic Steel
    L. Guerra-Fuentes
    M. A. L. Hernandez-Rodriguez
    P. Zambrano-Robledo
    A. Salinas-Rodriguez
    E. Garcia-Sanchez
    [J]. Journal of Materials Engineering and Performance, 2017, 26 : 3500 - 3506
  • [2] Relationship between microstructure and mechanical properties of a 5% Cr tempered martensitic tool steel
    Mebarki, N
    Delagnes, D
    Lamesle, P
    Delmas, F
    Levaillant, C
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2004, 387 : 171 - 175
  • [3] Influence of hydrogen on mechanical properties and fracture of tempered 13 wt% Cr martensitic stainless steel
    Kumar, B. Sunil
    Kain, Vivekanand
    Singh, Manpreet
    Vishwanadh, B.
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2017, 700 : 140 - 151
  • [4] Effect of cooling rate on microstructure and mechanical properties of CB2 tempered martensitic steel
    Ma, Yu-lin
    Liu, Yue
    Zhang, Li-ping
    Jiang, Xu
    Liu, Chun-ming
    [J]. CHINA FOUNDRY, 2020, 17 (02) : 158 - 166
  • [5] Effect of cooling rate on microstructure and mechanical properties of CB2 tempered martensitic steel
    Yu-lin Ma
    Yue Liu
    Li-ping Zhang
    Xu Jiang
    Chun-ming Liu
    [J]. China Foundry, 2020, 17 : 158 - 166
  • [6] Effect of cooling rate on microstructure and mechanical properties of CB2 tempered martensitic steel
    Yulin Ma
    Yue Liu
    Liping Zhang
    Xu Jiang
    Chunming Liu
    [J]. China Foundry., 2020, 17 (02) - 166
  • [7] Effect of cooling rate on microstructure and mechanical properties of CB2 tempered martensitic steel
    Yu-lin Ma
    Yue Liu
    Li-ping Zhang
    Xu Jiang
    Chun-ming Liu
    [J]. China Foundry, 2020, (02) : 158 - 166
  • [8] Microstructure and Mechanical Properties of Martensitic High-Strength Engineering Steel
    M. V. Maisuradze
    M. A. Ryzhkov
    D. I. Lebedev
    [J]. Metallurgist, 2020, 64 : 640 - 651
  • [9] Microstructure and Mechanical Properties of Martensitic High-Strength Engineering Steel
    Maisuradze, M. V.
    Ryzhkov, M. A.
    Lebedev, D. I.
    [J]. METALLURGIST, 2020, 64 (7-8) : 640 - 651
  • [10] Microstructure and Mechanical Properties of Tempered Ausrolled Nanobainite Steel
    Zhao, Jing
    Liu, Dezheng
    Li, Yan
    Yang, Yongsheng
    Wang, Tiansheng
    Zhou, Qian
    [J]. CRYSTALS, 2020, 10 (07): : 1 - 11
12345