Aluminum alloy strips casting using an unequal diameter twin roll caster

被引：0

作者：

Haga, T ^{[1
]}

Takahashi, K ^{[1
]}

Ikawa, M ^{[1
]}

机构：

[1] Osaka Inst Technol, Grad Sch, Asahi Ku, Osaka 5358585, Japan

来源：

DESIGNING, PROCESSING AND PROPERTIES OF ADVANCED ENGINEERING MATERIALS, PTS 1 AND 2 | 2004年 / 449-4卷

关键词：

twin roll caster; strip caster; continuous casting; thin strip; aluminum alloy;

D O I：

10.4028/www.scientific.net/MSF.449-452.145

中图分类号：

TQ174 [陶瓷工业]; TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

An unequal diameter twin roll caster was devised in order to increase productivity of the strip. This caster could cast the strip thicker than 6mm at the speed of 5m/min. The feature of this caster is that the lower roll was four times larger than the upper roll. The solidification length of the strip could be set longer easily than the conventional twin roll caster for aluminum alloy. Low solidification rate semisolid casting and low superheat casting were adopted. These were effective to increase the casting speed without decreasing the thickness of the strip. In the present study, the unequal diameter twin roll caster was designed and assembled. The test castings were operated and the characteristics of this caster were shown.

引用

页码：145 / 148

页数：4

共 50 条

[1] Aluminum alloy semisolid strip casting using an unequal diameter twin roll caster
Haga, T
Ikawa, M
Watari, H
[J]. PROCEEDINGS OF THE 1ST INTERNATIONAL CONFERENCE ON NEW FORMING TECHNOLOGY, 2004, : 209 - 214
[2] An unequal diameter twin roll caster for aluminum alloys casting
Haga, T
Ikawa, M
Watari, H
Kumai, S
[J]. PROCEEDINGS OF THE 34TH INTERNATIONAL MATADOR CONFERENCE: FORMERLY THE INTERNATIONAL MACHINE TOOL DESIGN AND RESEARCH CONFERENCES, 2004, : 199 - 204
[3] 6111 Aluminium alloy strip casting using an unequal diameter twin roll caster
Haga, T
Ikawa, M
Wtari, H
Kumai, S
[J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2006, 172 (02) : 271 - 276
[4] Casting of Al-Si hypereutectic aluminum alloy strip using an unequal diameter twin roll caster
Haga, Toshio
Inui, Hideki
Watari, Hisaki
Kumai, Shinji
[J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2007, 191 (1-3) : 238 - 241
[5] Casting of clad strip by an unequal diameter twin roll caster
Haga, T.
Sawai, M.
Nakamura, R.
Watari, H.
Kumai, S.
[J]. THERMEC 2009, PTS 1-4, 2010, 638-642 : 413 - +
[6] Strip Casting of 6061 and Recycled 6061 Alloy by an Unequal Diameter Twin Roll Caster
Haga, Toshio
Inui, Hideki
Nakamura, Ryoji
Kumai, Shinji
Watari, Hisaki
[J]. ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES II, PTS 1 AND 2, 2011, 264-265 : 1911 - +
[7] Twin roll casting of aluminum alloy strips
Haga, T
Tkahashi, K
Ikawaand, M
Watari, H
[J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2004, 153 : 42 - 47
[8] A vertical-type twin roll caster for aluminum alloy strips
Haga, T
Takahashi, K
Ikawa, M
Watari, H
[J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2003, 140 : 610 - 615
[9] Roll casting of aluminum alloy strip by melt drag twin roll caster
Haga, T
Suzuki, S
[J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2001, 118 (1-3) : 165 - 168
[10] Melt ejection twin roll caster for the strip casting of aluminum alloy
Haga, T
Suzuki, S
[J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2003, 137 (1-3) : 92 - 95

← 1 2 3 4 5 →