The effect of negative temperatures on the bend strength characteristics of the polyethylene pipeline

被引：0
|
作者：
Serebrennikov, Anatoly [1 ]
Serebrennikov, Daniil [2 ]
Lavrov, Igor [1 ]
机构：
[1] Ind Univ Tyumen, 38 Volodarskogo, Tyumen 625000, Russia
[2] Tyumen Higher Mil Engn Command Sch, 38 Volodarskogo, Tyumen 625000, Russia
来源：
MATERIALS TODAY-PROCEEDINGS | 2019年 / 19卷
关键词：
Trenchless pipe-layer; Polyethylene pipeline; Bend; Strain-stress state; Recommendations for use;
D O I：
10.1016/j.matpr.2019.07.685
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The results of testing the existing restrictions on bending of polyethylene pipes at different temperatures are presented. According to the mathematical model using the dependences of the elastic modulus and yield point, the stresses arising in the walls of pipes of different diameters during bending at different temperatures were calculated. The obtained dependences assume that if the design of the guide unit of the plow-type pipe-layer will provide the above conditions, the stresses arising in the pipe will not exceed the yield point, that is, the required installation conditions will be met. (C) 2019 Elsevier Ltd. All rights reserved.
引用
收藏
页码：2347 / 2349
页数：3
相关论文
共 50 条
  • [1] Effect of microstructure and texture on the mechanical properties in high strength pipeline bend
    Wang, Liang
    Zhou, Peishan
    Hu, Yiwen
    Wang, Bin
    INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING, 2022, 195
  • [2] Reaction characteristics and compressive strength of magnesia-phosphate cement at negative temperatures
    Jia, Xing-wen
    Luo, Jia-yin
    Zhang, Wen-xin
    Tang, Mao-hua
    Qian, Jue-shi
    Wang, Ping
    Li, Jun-meng
    CONSTRUCTION AND BUILDING MATERIALS, 2021, 305
  • [3] EFFECT OF POLYMERIC COATINGS ON BEND STRENGTH OF GLASS
    RITTER, JE
    AMERICAN CERAMIC SOCIETY BULLETIN, 1973, 52 (04): : 389 - 389
  • [4] Effect of 90°-pipe bend in a technical pipeline on reactive currents
    Lohrer, Christian
    Hahn, Matthias
    Arndt, Detlef
    Gratz, Rainer
    CHEMIE INGENIEUR TECHNIK, 2008, 80 (05) : 649 - 657
  • [5] Strength of Cracked Steel Structural Components at Negative Temperatures
    Sokolov S.A.
    Grachev A.A.
    Vasil’ev I.A.
    Russian Engineering Research, 2020, 40 (02) : 106 - 110
  • [6] Effect of Acetophenone on the Breakdown Strength of Polyethylene
    Li, Chunyang
    Han, Baozhong
    Zhang, Hui
    Zhao, Hong
    Zhang, Chengcheng
    2015 IEEE 11TH INTERNATIONAL CONFERENCE ON THE PROPERTIES AND APPLICATIONS OF DIELECTRIC MATERIALS, 2015, : 492 - 495
  • [7] EFFECT OF PRESSURE ON MELTING TEMPERATURES OF POLYETHYLENE FRACTIONS
    TAKAMIZAWA, K
    OHNO, A
    URABE, Y
    POLYMER JOURNAL, 1975, 7 (03) : 342 - 351
  • [8] ANALYSIS OF HYDROGEN EFFECT ON STRENGTH OF OFFSHORE PIPELINE
    Chulkin, Sergey G.
    Zinovyeva, Tatyana, V
    MARINE INTELLECTUAL TECHNOLOGIES, 2019, 2 (01): : 31 - 35
  • [9] DC breakdown strength of crosslinked polyethylene based nanocomposites at different temperatures
    Wang, Shihang
    Yu, Shihu
    Xiang, Jiao
    Li, Jianying
    Li, Shengtao
    IEEE TRANSACTIONS ON DIELECTRICS AND ELECTRICAL INSULATION, 2020, 27 (02) : 482 - 488
  • [10] Effect of Increased Temperatures on the Deformation and Strength Characteristics of a GFRP Based on a Fabric of Volumetric Weave
    D. S. Lobanov
    A. V. Babushkin
    A. Yu. Luzenin
    Mechanics of Composite Materials, 2018, 54 : 655 - 664
12345