Analysing the effect of weight reduction of Crankshaft on the pressure parameter inside cylinder of single cylinder SI engine

被引：1

作者：

Hingne, Mukund ^{[1
]}

Dwivedi, Rashmi ^{[2
]}

V. Choudri, Ravishanker ^{[2
]}

Chhalotre, Sanjay ^{[2
]}

机构：

[1] Sagar Inst Sci & Technol, Bhopal, India

[2] Sagar Inst Sci & Technol, Dept Mech Engn, Bhopal, India

来源：

MATERIALS TODAY-PROCEEDINGS | 2021年 / 47卷

关键词：

Internal-combustion engine; Cylinder; Pressure; Weight Reduction; Crankshaft;

D O I：

10.1016/j.matpr.2021.05.531

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

This work presents the analysis of the pressure inside the combustion chamber of a spark-ignition engine, with the help of Pressure Gauge. The pressure gauge measures the maximum pressure during compression stroke of an internal-combustion engine. The measured pressure depends on the crankshaft's position and the Inertia force on the Piston. This Inertia force is the result of the counter weights present on the crankshaft. If weight is reduced from these counterweights how does the Pressure inside the cylinder is affected is analysed in the present research. (c) 2021 Elsevier Ltd. All rights reserved. Selection and peer-review under responsibility of the scientific committee of the Technology Innovation in Mechanical Engineering-2021.

引用

页码：6296 / 6300

页数：5

共 50 条

[1] Cylinder pressure reconstruction from crankshaft speed measurement in a four-stroke single cylinder diesel engine
Taraza, Dinu
Henein, Naeirn A.
Gade, Mangesh J.
Bryzik, Walter
[J]. PROCEEDINGS OF THE 2005 SPRING TECHNICAL CONFERENCE OF THE ASME INTERNAL COMBUSTION ENGINE DIVISION, 2005, : 387 - 395
[2] A research on cylinder pressure sensor as an alternative for the camshaft and crankshaft position sensors of engine
Wang, Jinli
Yang, Fuyuan
Ouyang, Minggao
Huang, Ying
Fang, Cheng
Yang, Xueqing
[J]. Qiche Gongcheng/Automotive Engineering, 2014, 36 (12): : 1455 - 1460
[3] Diagnosis of parts inside the cylinder of marine diesel engine by analysing vibration signals
Yang, JG
[J]. CONDITION MONITORING '97, 1997, : 202 - 207
[4] In-cylinder pressure reconstruction for multicylinder SI-engine by combined processing of engine speed and one cylinder pressure
Hamedovic, H
Raichle, F
Böhme, JE
[J]. 2005 IEEE INTERNATIONAL CONFERENCE ON ACOUSTICS, SPEECH, AND SIGNAL PROCESSING, VOLS 1-5: SPEECH PROCESSING, 2005, : 677 - 680
[5] Dynamic Stress Analysis of a Certain Single-cylinder Diesel Engine Crankshaft
Wang Guixin
Sun Wenfu
Li Xiaobo
Kuang Xiaohong
[J]. PROCEEDINGS OF THE 29TH CHINESE CONTROL CONFERENCE, 2010, : 4241 - 4245
[6] Design optimization for the weight reduction of 2-cylinder reciprocating compressor crankshaft
Arshad, Ali
Cong, Pengbo
Elmenshawy, Adham Ahmed Awad Elsayed
Blumberg, Ilmars
[J]. ARCHIVE OF MECHANICAL ENGINEERING, 2021, 68 (04) : 449 - 471
[7] A novel method for in-cylinder pressure prediction using the engine instantaneous crankshaft torque
Tsitsilonis, Konstantinos-Marios
Theotokatos, Gerasimos
[J]. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART M-JOURNAL OF ENGINEERING FOR THE MARITIME ENVIRONMENT, 2022, 236 (01) : 131 - 149
[8] Cylinder head noise reduction on a 4-cylinder 4-valve SI engine
Kraus, N
Schafer, E
Joerres, M
Grunert, T
[J]. EUROPEAN CONFERENCE ON VEHICLE NOISE AND VIBRATION, 1998, 1998 (05): : 239 - 248
[9] Thermodynamic analysis of a multi - Fueled single cylinder SI engine
Department of Mechanical Engineering, Bangladesh University of Engineering and Technology, Dhaka-1000, Bangladesh
[J]. ASME Int. Mech. Eng. Congr. Expo., IMECE, PARTS A AND B (1541-1550):
[10] Reduction of Friction Losses by Means of Cylinder Liner Offset in a Floating Liner Single Cylinder Engine
[J]. 2018, Society of Automotive Engineers of Japan (09)

← 1 2 3 4 5 →