Formation mechanism of graded composition in Al-Al2Cu functionally graded materials fabricated by a centrifugal in situ method

被引：77
|
作者：
Watanabe, Y [1 ]
Oike, S [1 ]
机构：
[1] Shinshu Univ, Dept Funct Machinery & Mech, Ueda, Nagano 3868567, Japan
来源：
ACTA MATERIALIA | 2005年 / 53卷 / 06期
关键词：
functionally graded materials; centrifugal in situ method; centrifugal force; intermetallic compound; particle size;
D O I：
10.1016/j.actamat.2004.12.013
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
To discuss the formation mechanism of the graded composition during the centrifugal in situ method, a detailed study of microstructures in the Al-Al2Cu FGMs fabricated by the centrifugal in situ method from various initial master ingots was carried out. It was found that FGMs can be fabricated by the centrifugal in situ method from not only hypoeutectic or hypereutectic alloys but also eutectic alloys. The particle sizes of the Al2Cu and Al primary crystals were dependent upon their locations in the ring thickness. Using the above experimental results, it has been concluded that the graded structure appearing in the eutectic specimen must be caused by the difference in the densities between Al and Cu in liquid state. (c) 2005 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.
引用
收藏
页码：1631 / 1641
页数：11
相关论文
共 50 条
  • [1] Development of in-situ Al-Al2Cu functionally graded materials by a centrifugal method
    Oike, Shin
    Watanabe, Yoshimi
    [J]. International Journal of Materials and Product Technology, 2001, 16 (1-3) : 40 - 49
  • [2] Development of in-situ Al-Al2Cu functionally graded materials by a centrifugal method
    Oike, S
    Watanabe, Y
    [J]. INTERNATIONAL JOURNAL OF MATERIALS & PRODUCT TECHNOLOGY, 2001, 16 (1-3): : 40 - 49
  • [3] Distribution of microstructure and cooling rate in Al-Al2Cu functionally graded materials fabricated by a centrifugal method
    Watanabe, Yoshimi
    Hattori, Yuko
    Sato, Hisashi
    [J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2015, 221 : 197 - 204
  • [4] Corrosion behavior of Al-Al3Ni and Al-Al2Cu functionally graded materials fabricated by a centrifugal method
    Noda, Kazuhiko
    Miyahara, Keita
    Watanabe, Yoshimi
    [J]. MULTISCALE AND FUNCTIONALLY GRADED MATERIALS, 2008, 973 : 574 - +
  • [5] Characterization of Al-Al2Cu functionally graded material produced by using horizontal centrifugal casting
    Mehditabar, Aref
    Rahimi, Gholam H.
    Vandat, Seyed Ebrahim
    [J]. MULTIDISCIPLINE MODELING IN MATERIALS AND STRUCTURES, 2018, 14 (04) : 647 - 662
  • [6] Microstructures of Al-Al3Ti functionally graded materials fabricated by centrifugal solid-particle method and centrifugal in situ method
    Watanabe, Yoshimi
    Zhou, Qi
    Sato, Hisashi
    Fujii, Toshiyuki
    Inamura, Tomonari
    [J]. JAPANESE JOURNAL OF APPLIED PHYSICS, 2017, 56 (01)
  • [7] Particle shape distribution in Al-Al3Ni functionally graded materials fabricated by a centrifugal in-situ, method
    Matsuda, K
    Sato, R
    Watanabe, Y
    [J]. DE SIGN, MANUFACTURING AND APPLICATIONS OF COMPOSITES, 2003, : 77 - 84
  • [8] Wear of Al/Al3Zr functionally graded materials fabricated by centrifugal solid-particle method
    El-Hadad, Shimaa
    Sato, Hisashi
    Watanabe, Yoshimi
    [J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2010, 210 (15) : 2245 - 2251
  • [9] Effect of Heat Treatment on the Characterizations of Functionally Graded Al/Al2Cu Fabricated by Horizontal Centrifugal Casting
    Mehditabar, Aref
    Rahimi, Gholam H.
    Krol, Mariusz
    Vahdat, Seyed Ebrahim
    [J]. INTERNATIONAL JOURNAL OF METALCASTING, 2020, 14 (04) : 962 - 976
  • [10] Effect of Heat Treatment on the Characterizations of Functionally Graded Al/Al2Cu Fabricated by Horizontal Centrifugal Casting
    Aref Mehditabar
    Gholam H. Rahimi
    Mariusz Krol
    Seyed Ebrahim Vahdat
    [J]. International Journal of Metalcasting, 2020, 14 : 962 - 976
12345