Slope Monitoring by Using 2-D Resistivity Method at Sungai Batu, Pulau Pinang, Malaysia

Slope is a dynamic system of geo-environmental phenomena that related to the movement of the soil and rock masses. In Pulau Pinang, the occurrence of slope related phenomena such as landslide and rock fall has become a huge issue especially during rainy season as the government would have to invest more for the people safety. 2-D resistivity method is one of the geophysical methods that can be applied to overcome this issue thus prepare countermeasure actions. Monitoring is one of the common acquisition technique that has been used in solving such issue. This technique was applied to identify and monitor changes at the suspected area and thus, countermeasure steps can be taken accordingly and not blindfolded. Starting from August until November 2016, a 200 m survey line of 2-D resistivity survey had been conducted monthly at Sungai Batu, Pulau Pinang slope for monitoring purpose. Three resistivity ranges were able to detect within the subsurface. Resistivity value of 250 - 400 Omega m indicated the low resistivity value and interpreted as the weak zone located at distance of 90 - 120 m with depth of 10 m. Intermediate resistivity value was interpreted as weathered granite zone with resistivity value of 400 - 1500 Omega m was found at almost along survey line. High resistivity value was > 5000 Omega m and interpreted as granitic bedrock located at depth of > 20 m. Aside from weathered granite zone and weak zone, a fracture was found develop over time at distance of 130 - 140 m. The features found have the potential to be the cause for slope failure phenomena to occur. As a conclusion, monitoring slope using 2-D resistivity method is a success and indeed helpful in overcome landslide and rock fall issue as a pre-countermeasure action.