Experimental study on influencing factors of axial clearance for scroll compressor

被引:9
|
作者
Li, Haisheng [1 ]
Chen, Yinghua [1 ]
Wu, Kaibo [1 ]
Wu, Tao [1 ]
Zhang, Xinxi [1 ]
机构
[1] China Univ Min & Technol, Key Lab Coal Proc & Efficient Utilizat, Minist Educ, Sch Chem Engn & Technol, Xuzhou 221116, Jiangsu, Peoples R China
基金
中国国家自然科学基金;
关键词
Scroll compressor; Axial clearance; Eddy current displacement sensor; Influencing factors;
D O I
10.1016/j.ijrefrig.2015.02.006
中图分类号
O414.1 [热力学];
学科分类号
摘要
An experimental system of non-contact measurement has been established for a scroll compressor to analyze the influencing factors of axial clearance. Experimental method and installation for eddy current displacement sensors have been introduced in detail based on technical analysis. The output voltage input into a computer through analog oscilloscope is recorded by oscilloscope software. The axial clearance is calculated according to the relationship between the output voltage and displacement. The axial clearance is discussed under the influence of different rotary speed, temperature and position. The results show that the experimental schemes are reasonable to realize the detection of the dynamic axial clearance. Temperature and rotary speed are inversely proportional to the axial clearance. The effect of rotary speed on the axial clearance is more noticeable than that of the temperature. The axial clearance along the spread angle of scroll profiles is obviously fluctuating under the action of overturning moment. (C) 2015 Elsevier Ltd and IIR. All rights reserved.
引用
收藏
页码:38 / 44
页数:7
相关论文
共 50 条
  • [1] Study On Axial Clearance and Seal of Scroll Compressor
    Wang, Jianji
    2019 3RD INTERNATIONAL WORKSHOP ON RENEWABLE ENERGY AND DEVELOPMENT (IWRED 2019), 2019, 267
  • [2] Measurement of axial dynamic clearance in scroll compressor
    National Engineering Research Center of Fluid Machinery and Compressors, Xi'an Jiaotong University, Xi'an 710049, China
    Hsi-An Chiao Tung Ta Hsueh/Journal of Xi'an Jiaotong University, 2008, 42 (07): : 795 - 798
  • [3] Experimental measurement of axial clearance in scroll compressor using eddy current displacement sensor
    Yang, Q.
    Li, L.
    Zhao, Y.
    Shu, P.
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 2008, 222 (07) : 1315 - 1320
  • [4] Numerical analysis of the transient leakage flow in axial clearance of a scroll refrigeration compressor
    Sun, Shuaihui
    Wang, Xianwen
    Guo, Pengcheng
    Wu, Kai
    Luo, Xingqi
    Liu, Guangbin
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING, 2022, 236 (01) : 47 - 61
  • [5] A gas leakage model in the leakage clearance of scroll compressor
    Zha, Hai-Bin
    Song, Yong-Xing
    Wang, Jun
    Jiang, Ying
    Qiu, Xing-Qi
    Kung Cheng Je Wu Li Hsueh Pao/Journal of Engineering Thermophysics, 2016, 37 (07): : 1438 - 1443
  • [6] Evolution of the flow instabilities in an axial compressor rotor with large tip clearance: An experimental and URANS study
    Wang, Hao
    Wu, Yadong
    Wang, Yangang
    Deng, Shuanghou
    AEROSPACE SCIENCE AND TECHNOLOGY, 2020, 96
  • [7] FACTORS AFFECTING MEASURED AXIAL COMPRESSOR TIP CLEARANCE VORTEX CIRCULATION
    KHALID, SA
    JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME, 1995, 117 (03): : 487 - 490
  • [8] A numerical study on the tip clearance in an axial transonic compressor rotor
    Ren, Xiaodong
    Gu, Chunwei
    APPLIED THERMAL ENGINEERING, 2016, 103 : 282 - 290
  • [9] A numerical study on the tip clearance in an axial transonic compressor rotor
    Department of Mathematics, School of Science, Hong Kong University of Science and Technology, Hong Kong, Hong Kong
    不详
    Appl Therm Eng, (282-290):
  • [10] An experimental study on variable air volume operation of ducted air-conditioning with digital scroll compressor and conventional scroll compressor
    Huang, Hu
    Li, Qihe
    Yuan, Dongxue
    Qin, Zhenchun
    Zhang, Zhongbin
    APPLIED THERMAL ENGINEERING, 2008, 28 (07) : 761 - 766