Sludge wash-out as strategy for Anammox process start-up

In this study sludge wash-out was evaluated as a strategy to start-up the Anammox process in order to establish it in a shorter period of time. Sludge from a domestic wastewater treatment plant (WTP) was used to seed two (RI and RII) anaerobic sequencing batch reactors (ASBR). During the start-up period RI was operated as a continuous stirred tank reactor (CSTR) using a dilution rate of 0.2 d(-1), which promoted the sludge washout. After this period, the remaining sludge was retained in the reactor. The reactor RII was operated as an ASBR throughout the study period with a high cell retention. The performance of the two reactors in terms of nitrogen removal was compared over a period of 380 days. During the last RI operation phase the specific nitrogen removal rate increased exponentially, attaining values of 85 mg N/g TSS d. However, a rate of 190 mg N/ g TSS d in the batch test under optimal conditions was achieved. The specific nitrogen removal rate remained almost constant for RII with a mean value of 6 mg N/g TSS d being observed during the operation period. The rate for the RII batch test was 20 mg N/g TSS d. These results confirm that the higher total suspended solids (TSS) in RH (reactor with high cell retention) was not effective in terms of N removal improvement, Anarnmox-like bacteria were found using fluorescence in situ hybridization (FISH) in reactor RI after 225 days and a new Anammox species was identified. (c) 2007 Elsevier Ltd. All rights reserved.