Status of the SG-III Solid-state Laser Facility

SG-III laser facility beam begins with a nanojoule energy laser pulse from the master oscillator and a fiber front-end system that can provide a variety of pulse shapes suitable for a wide range of experiments. The chirped pulse stacking method is used in the front-end system to generate arbitrarily shaped pulse with a rise time less than 50ps. The system stacks a set of 100-ps chirped pulses in fiber time-delay lines to obtain a 5-ns flat-top pulse with a spectral bandwidth of 1.2nm. The pulse is then transported to preamplifier modules under the middle of CSF for amplification and beam shaping. There is a total of 48 preamplifier modules on SG-III, each feeding a single laser beams. The main amplifier column of 4 high by 2 wide has been chosen as a module and the clear optical aperture is 40cmx40cm. Small PEPC are chosen for system isolation and beam can be rotated by 90 degree in U-turn beam reverser located in the middle of TSF. After main amplifier, beams are subsequently redirected to final optics assembly in switchyard and are focused on the center of the target chamber with the diameter of 6m.