The Effect of Hot Working on the Mechanical Properties of High Strength Biomedical Ti-Nb-Ta-Zr-O Alloy

被引:12
|
作者
Preisler, Dalibor [1 ]
Janecek, Milos [1 ]
Harcuba, Petr [1 ]
Dzugan, Jan [2 ]
Halmesova, Kristyna [2 ]
Malek, Jaroslav [3 ]
Veverkova, Anna [1 ]
Strasky, Josef [1 ]
机构
[1] Charles Univ Prague, Dept Phys Mat, Prague 12116, Czech Republic
[2] COMTES FHT, Dobrany 33441, Czech Republic
[3] Czech Tech Univ, Fac Mech Engn, Prague 12135, Czech Republic
关键词
titanium alloys; hot working; biomedicine; tensile testing; fatigue testing; BETA-TITANIUM ALLOYS; UNCEMENTED FEMORAL COMPONENT; TOTAL HIP-ARTHROPLASTY; MICROSTRUCTURAL EVOLUTION; DEFORMATION; FATIGUE; FE; BIOMATERIALS; COMPRESSION; BEHAVIOR;
D O I
10.3390/ma12244233
中图分类号
O64 [物理化学(理论化学)、化学物理学];
学科分类号
070304 ; 081704 ;
摘要
Beta titanium alloy Ti-35Nb-6Ta-7Zr-0.7O (wt%) was developed as a material intended for the manufacturing of a stem of a hip joint replacement. This alloy contains only biocompatible elements and possesses a very high yield strength already in the cast condition (900 MPa). However, the porosity, large grain size and chemical inhomogeneity reduce the fatigue performance below the limits required for utilization in the desired application. Two methods of hot working, die forging and hot rolling, were used for processing of this alloy. Microstructural evolution, tensile properties and fatigue performance of the hot worked material were investigated and compared to the cast material. Microstructural observations revealed that porosity is removed in all hot-worked conditions and the grain size is significantly reduced when the area reduction exceeds 70%. Static tensile properties were improved by both processing methods and ultimate tensile strength (UTS) of 1200 MPa was achieved. Fatigue results were more reproducible in the hot rolled material due to better microstructural homogeneity, but forging leads to an improved fatigue performance. Fatigue limit of 400 MPa was achieved in the die-forged condition after 70% of area reduction and in the hot rolled condition after 86% of area reduction.
引用
收藏
页数:18
相关论文
共 50 条
  • [1] DEFORMATION IN Ti-Nb-Ta-Zr-O ALLOY AT NEAR IDEAL STRENGTH
    Kuramoto, Shigeru
    Furuta, Tadahiko
    Nagasako, Naoyuki
    Hara, Masashi
    THERMEC 2009, PTS 1-4, 2010, 638-642 : 3858 - +
  • [2] Mechanical anisotropy and ideal strength in a multifunctional Ti-Nb-Ta-Zr-O alloy (Gum Metal)
    Hara, Masashi
    Shimizu, Yusuke
    Yano, Takeshi
    Takesue, Naohisa
    Furuta, Tadahiko
    Kuramoto, Shigeru
    INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, 2009, 100 (03) : 345 - 348
  • [3] Mechanical properties and phase stability of Ti-Nb-Ta-Zr-O alloys
    Furuta, Tadahiko
    Kuramoto, Shigeru
    Hwang, Junghwan
    Nishino, Kazuaki
    Saito, Takashi
    Niinomi, Mitsuo
    MATERIALS TRANSACTIONS, 2007, 48 (05) : 1124 - 1130
  • [4] MICROSTRUCTURE AND MECHANICAL PROPERTIES OF Ti-Nb-Zr-Ta-O BIOMEDICAL ALLOY
    Preisler, Dalibor
    Vaclavova, Kristina
    Strasky, Josef
    Janecek, Milos
    Harcuba, Petr
    METAL 2016: 25TH ANNIVERSARY INTERNATIONAL CONFERENCE ON METALLURGY AND MATERIALS, 2016, : 1509 - 1513
  • [5] High Temperature Mechanical Properties and Microstructure of Ti-Nb-Zr-Ta-O Biomedical Alloy
    Preisler, D.
    Strasky, J.
    Harcuba, P.
    Warchomicka, F. G.
    Janecek, M.
    ACTA PHYSICA POLONICA A, 2018, 134 (03) : 636 - 639
  • [6] Plastic deformation in a multifunctional Ti-Nb-Ta-Zr-O alloy
    Kuramoto, S
    Furuta, T
    Hwang, JH
    Nishino, K
    Saito, T
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2006, 37A (03): : 657 - 662
  • [7] Study of the influence of Zr on the mechanical properties and functional response of Ti-Nb-Ta-Zr-O alloy for orthopedic applications
    Acharya, Srijan
    Panicker, Arpana Gopi
    Laxmi, Devara Vijaya
    Suwas, Satyam
    Chatterjee, Kaushik
    MATERIALS & DESIGN, 2019, 164
  • [8] Effects of Nb and O Contents on Microstructures and Mechanical Functionalities of Biomedical Ti-Nb-Ta-Zr-O System Alloys
    Akahori, Toshikazu
    Niinomi, Mitsuo
    Nakai, Masaaki
    Ono, Tomoyuki
    Tsutsumi, Harumi
    TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 2010, 96 (02): : 93 - 100
  • [9] Plastic deformation in a multifunctional Ti-Nb-Ta-Zr-O alloy
    S. Kuramoto
    T. Furuta
    J. H. Hwang
    K. Nishino
    T. Saito
    Metallurgical and Materials Transactions A, 2006, 37 : 657 - 662