Electrical characterization of aluminum-oxynitride stacked gate dielectrics prepared by a layer-by-layer process of chemical vapor deposition and rapid thermal nitridation

We investigated the use of AlOx:N/SiNy stacked gate dielectric as an alternate gate dielectric, which were prepared by alternately repeating sub-nanometer deposition of Al2O3 from an alkylamine-stabilized AlH3 + N2O gas mixture and rapid thermal nitridation in NH3. The negative fix charges, being characteristics of almina, were as many as 3.9 x 10(12) cm(-2) in the effective net charge density. The effective dielectric constant and the breakdown field were 8.9 and 8 MV/cm, respectively, being almost the same as pure Al2O3. And we have demonstrated that the leakage current through the AlOx:N/SiNy stacked gate dielectric with a capacitance equivalent thickness (CET) of 1.9 nm is about two orders of magnitude less than that of thermally-grown SiO2. Also, we have confirmed the dielectric degradation similar to the stress-induced leakage current (SILC) mode and subsequent soft breakdown (SBD) reported in ultrathin SiO2 under constant current stress and a good dielectric reliability comparable to thermally-grown ultrahin SiO2. From the analysis of n(+)poly-Si gate metal-insulator-semiconductor field effect transistor (MISFET) performance, remote coulomb scattering due to changes in the gate dielectric plays an important role on the mobility degradation of MISFET with AlON/SiON gate stack.