Effects of Printing Parameters on Properties of FDM 3D Printed Residue of Astragalus/Polylactic Acid Biomass Composites

被引:18
|
作者
Yu, Wangwang [1 ,2 ]
Shi, Jianan [1 ]
Sun, Liwei [1 ]
Lei, Wen [1 ]
机构
[1] Nanjing Forestry Univ, Coll Sci, Nanjing 210037, Peoples R China
[2] Nanjing Vocat Univ Ind Technol, Sch Mech Engn, Nanjing 210023, Peoples R China
来源
MOLECULES | 2022年 / 27卷 / 21期
关键词
poly(lactic acid) (PLA); residue of Astragalus (ROA); composite; fused deposition modeling (FDM); 3D printing; MECHANICAL-PROPERTIES;
D O I
10.3390/molecules27217373
中图分类号
Q5 [生物化学]; Q7 [分子生物学];
学科分类号
071010 ; 081704 ;
摘要
In order to develop a new kind of filament material for the fused deposition modeling (FDM) 3D printing, the residue of Astragalus (ROA), one of the most important Chinese herbal medicines, and polylactic acid were chosen as the raw materials to FDM 3D print biomass composite specimens, the effects of the printing parameters on the properties of the specimens were investigated. The results indicated that the mechanical properties and thermal stability of the printed specimen were affected obviously by the parameters while the melting and crystallization behavior of the specimens were little affected. For the wettability, it was also little affected by the printing parameter except for the printing speed. Increasing the printing temperature and the filling density or reducing the printing speed and the layer thickness could improve both the mechanical properties and the thermal stability of the FDM 3D printed PLA/ROA composite specimen; reducing the deposition angle could also improve the mechanical properties while having little effect on the thermal stability of the specimen.
引用
收藏
页数:15
相关论文
共 50 条
  • [1] Preparation and properties of heat-treated esterified wood flour/polylactic acid composites for FDM 3D printing
    Feng Chen
    Xiaohui Ni
    Yinan Liu
    Xinghua Xia
    Xun Gao
    [J]. Journal of Materials Science, 2022, 57 : 14819 - 14834
  • [2] Preparation and properties of heat-treated esterified wood flour/polylactic acid composites for FDM 3D printing
    Chen, Feng
    Ni, Xiaohui
    Liu, Yinan
    Xia, Xinghua
    Gao, Xun
    [J]. JOURNAL OF MATERIALS SCIENCE, 2022, 57 (31) : 14819 - 14834
  • [3] Effects of Selected Printing Parameters on the Fire Properties of 3D-Printed Neat Polylactic Acid (PLA) and Wood/PLA Composites
    Knez, Natasa
    Kariz, Mirko
    Knez, Friderik
    Ayrilmis, Nadir
    Kuzman, Manja Kitek
    [J]. JOURNAL OF RENEWABLE MATERIALS, 2021, 9 (11) : 1883 - 1895
  • [4] Effect of Printing Parameters on Tensile, Dynamic Mechanical, and Thermoelectric Properties of FDM 3D Printed CABS/ZnO Composites
    Aw, Yah Yun
    Yeoh, Cheow Keat
    Idris, Muhammad Asri
    Teh, Pei Leng
    Hamzah, Khairul Amali
    Sazali, Shulizawati Aqzna
    [J]. MATERIALS, 2018, 11 (04):
  • [5] Comprehensive investigation and prediction model for mechanical properties of coconut wood–polylactic acid composites filaments for FDM 3D printing
    J. Kananathan
    M. Samykano
    K. Kadirgama
    D. Ramasamy
    M. M. Rahman
    [J]. European Journal of Wood and Wood Products, 2022, 80 : 75 - 100
  • [6] The Synergic Effects of FDM 3D Printing Parameters on Mechanical Behaviors of Bronze Poly Lactic Acid Composites
    Moradi, Mahmoud
    Moghadam, Mojtaba Karami
    Shamsborhan, Mahmoud
    Bodaghi, Mahdi
    [J]. JOURNAL OF COMPOSITES SCIENCE, 2020, 4 (01):
  • [7] Dielectric Properties of 3D Printed Polylactic Acid
    Dichtl, Claudius
    Sippel, Pit
    Krohns, Stephan
    [J]. ADVANCES IN MATERIALS SCIENCE AND ENGINEERING, 2017, 2017
  • [8] Morphology and Mechanical Properties of 3D Printed Wood Fiber/Polylactic Acid Composite Parts Using Fused Deposition Modeling (FDM): The Effects of Printing Speed
    Yang, Teng-Chun
    Yeh, Chin-Hao
    [J]. POLYMERS, 2020, 12 (06)
  • [9] Comprehensive investigation and prediction model for mechanical properties of coconut wood-polylactic acid composites filaments for FDM 3D printing
    Kananathan, J.
    Samykano, M.
    Kadirgama, K.
    Ramasamy, D.
    Rahman, M. M.
    [J]. EUROPEAN JOURNAL OF WOOD AND WOOD PRODUCTS, 2022, 80 (01) : 75 - 100
  • [10] A statistical analysis on effect of process parameters on tensile, flexural, and hardness characteristics of wood–polylactic acid composites using FDM 3D printing
    Abhay Mishra
    Rajeev Kumar
    Anuj Kumar Sharma
    Nitin Kumar Gupta
    Nalin Somani
    [J]. International Journal on Interactive Design and Manufacturing (IJIDeM), 2024, 18 : 1303 - 1315