Damping Behavior of Highly Entangled High Density Polyethylene after Uniaxial Step Strains

被引：4
|
作者：
Kabeya, Takumi [1 ]
Yoshikawa, Katsuyuki [1 ]
Horinaka, Jun-ichi [1 ]
Takigawa, Toshikazu [1 ]
机构：
[1] Kyoto Univ, Dept Chem Mat, Nishikyo Ku, Kyoto 6158510, Japan
来源：
NIHON REOROJI GAKKAISHI | 2015年 / 43卷 / 01期
关键词：
High density polyethylene; Highly entangled melt; Damping function; Uniaxial deformation; Stress relaxation; DOI-EDWARDS THEORY; STRESS-RELAXATION; RHEOLOGICAL PROPERTIES; NONLINEAR RHEOLOGY; ELONGATIONAL FLOW; POLYMER MELTS; SHEAR; EXTENSIONS; MODULUS; LIQUIDS;
D O I：
10.1678/rheology.43.11
中图分类号：
O3 [力学];
学科分类号：
08 ; 0801 ;
摘要：
Stress relaxation after a large step strain is conducted for melts of highly entangled high density polyethylene in the uniaxial deformation by a conventional tensile tester. Prior to the stress relaxation tensile tests are made to confirm the uniformity of the elongation. The damping function for the melts in uniaxial deformation is almost identical or close to the prediction by the Doi-Edwards (DE) theory: Stronger damping than the DE prediction, which is often observed for highly entangled polymer melts in shear, is not observed in the uniaxial deformation.
引用
收藏
页码：11 / 15
页数：5
相关论文
共 50 条
  • [1] DELAYED SLIP AFTER STEP STRAINS IN HIGHLY ENTANGLED POLYSTYRENE SOLUTIONS
    ARCHER, LA
    CHEN, YL
    LARSON, RG
    JOURNAL OF RHEOLOGY, 1995, 39 (03) : 519 - 525
  • [2] Damping and Slipping Behavior of Highly Entangled Polyisobutylene
    Yoshikawa, Katsuyuki
    Teng, Fei
    Kabeya, Takumi
    Horinaka, Jun-ichi
    Takigawa, Toshikazu
    NIHON REOROJI GAKKAISHI, 2016, 44 (01) : 61 - 63
  • [3] INFLUENCE OF ANISOTROPY OF HIGH-DENSITY POLYETHYLENE ON ITS BEHAVIOR IN CONDITIONS OF UNIAXIAL STRETCHING
    KARPOVA, SG
    POPOV, AA
    CHVALUN, SN
    GODOVSKII, YK
    ZUBOV, YA
    ZAIKOV, GY
    VYSOKOMOLEKULYARNYE SOEDINENIYA SERIYA A, 1983, 25 (11): : 2435 - 2440
  • [4] Nonlinear rheology of highly entangled polymer liquids: Step shear damping function
    Islam, MT
    Sanchez-Reyes, J
    Archer, LA
    JOURNAL OF RHEOLOGY, 2001, 45 (01) : 61 - 82
  • [5] Failure behavior after stepwise uniaxial extension of entangled polymer melts
    Sun, Hao
    Lin, Panpan
    Liu, Gengxin
    Ntetsikas, Konstantinos
    Misichronis, Konstantinos
    Kang, Namgoo
    Liu, Jianning
    Avgeropoulos, Apostolos
    Mays, Jimmy
    Wang, Shi-Qing
    JOURNAL OF RHEOLOGY, 2015, 59 (03) : 751 - 767
  • [6] Stress relaxation after a step strain in uniaxial extension of polyisobutylene and polyethylene
    Barroso, VC
    Ribeiro, SP
    Maia, JM
    RHEOLOGICA ACTA, 2003, 42 (04) : 345 - 354
  • [7] Stress relaxation after a step strain in uniaxial extension of polyisobutylene and polyethylene
    Vitor C. Barroso
    Sandra P. Ribeiro
    João M. Maia
    Rheologica Acta, 2003, 42 : 345 - 354
  • [8] TENSILE MODULUS INCREASE ON UNIAXIAL DRAW OF HIGH-DENSITY POLYETHYLENE
    WANG, LH
    PORTER, RS
    KANAMOTO, T
    POLYMER COMMUNICATIONS, 1990, 31 (12): : 457 - 460
  • [9] Effect of Strain Rate on Microscopic Deformation Behavior of High-density Polyethylene under Uniaxial Stretching.
    Kida, Takumitsu
    Hiejima, Yusuke
    Nitta, Koh-hei
    INTERNATIONAL CONFERENCE ON COMPOSITE MATERIAL, POLYMER SCIENCE AND ENGINEERING (CMPSE2017), 2017, 130
  • [10] Cyclic Behavior of High Density Polyethylene (HDPE)
    Dusunceli, Necmi
    Aydemir, Bulent
    Terzi, Niyazi U.
    5TH INTERNATIONAL CONFERENCE ON TIMES OF POLYMERS TOP AND COMPOSITES, 2010, 1255 : 58 - +
12345