Simulation of lubricant Stribeck curve for SAE grade engine lubricants

被引:0
|
作者
Hamdan, S. H. [1 ]
Chong, W. W. F. [2 ,3 ]
机构
[1] Univ Kuala Lumpur, Malaysian France Inst, Dept Mech & Mfg, Sect 14,Jalan Teras Jernang, Bandar Baru Bangi 43650, Selangor, Malaysia
[2] Univ Teknol Malaysia, Imperial Coll London, UTM Ctr Low Carbon Transport Cooperat, Skudai 81310, Johor, Malaysia
[3] Univ Teknol Malaysia, Fac Mech Engn, Skudai 81310, Johor, Malaysia
关键词
Lubricant Stribeck curve; mineral lubricant; synthetic lubricant;
D O I
暂无
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
The paper simulates lubricant Stribeck curve for SAE grade engine lubricants by coupling Reynolds solution with Greenwood and Tripp's rough surface contact model. The predicted lubricant Stribeck curves for SAE5W40 and SAE15W40 engine lubricants are validated with measured data from a pin-on-disc tribometer. The proposed mathematical solution is shown to be capable of predicting lubricant Stribeck curves that correlate well with experimental data for both engine lubricants, capturing frictional behavior for the whole range of lubrication regimes. Such predictive tool could prove to be beneficial to automotive manufacturers in selecting suitable engine lubricants for their vehicles.
引用
收藏
页码:52 / 53
页数:2
相关论文
共 25 条
  • [1] The importance of the Stribeck curve in the minimisation of engine friction
    Bovington, C
    Korcek, S
    Sorab, J
    LUBRICATION AT THE FRONTIER: THE ROLE OF THE INTERFACE AND SURFACE LAYERS IN THE THIN FILM AND BOUNDARY REGIME, 1999, 36 : 205 - 214
  • [2] Determination and application of stribeck curve in development of steel cold rolling lubricants
    Wu, Rong
    Knapik, Matthew
    Iron and Steel Technology, 2010, 7 (08): : 52 - 57
  • [3] Analysis of used lubricant engine oil: SAE20W50
    Amoura Meriem
    Haddad Fadila
    ADVANCED MANUFACTURING TECHNOLOGY, PTS 1-3, 2011, 314-316 : 1463 - 1466
  • [4] FARM ENGINE PERFORMANCE WITH LOWER GRADE FUELS AND DEGRADATION OF ITS LUBRICANTS
    TAKEDA, S
    JOURNAL OF JAPAN SOCIETY OF LUBRICATION ENGINEERS, 1971, 16 (02): : 130 - &
  • [5] SIMULATION AND IMPLEMENTATION OF TURBOCHARGING A 600CC ENGINE FOR FORMULA SAE
    Farrugia, M.
    Grech, N.
    Chircop, M.
    Azzopardi, J. P.
    ENGINEERING MECHANICS 2014, 2014, : 164 - 167
  • [6] Engine lubricating oil classification by SAE grade and source based on dielectric spectroscopy data
    Guan, L.
    Feng, X. L.
    Xiong, G.
    ANALYTICA CHIMICA ACTA, 2008, 628 (01) : 117 - 120
  • [7] Introduction of Fuel Economy Engine Oil Performance Target with New SAE Viscosity Grade
    Ishikawa, Masami
    Yamamori, Kazuo
    Hirano, Satoshi
    Kowalski, Teri
    Linden, James
    SAE INTERNATIONAL JOURNAL OF FUELS AND LUBRICANTS, 2016, 9 (02) : 374 - 382
  • [8] Molecular dynamics simulation of the Stribeck curve: Boundary lubrication, mixed lubrication, and hydrodynamic lubrication on the atomistic level
    Stephan, Simon
    Schmitt, Sebastian
    Hasse, Hans
    Urbassek, Herbert M.
    FRICTION, 2023, 11 (12) : 2342 - 2366
  • [9] Molecular dynamics simulation of the Stribeck curve: Boundary lubrication, mixed lubrication, and hydrodynamic lubrication on the atomistic level
    Simon Stephan
    Sebastian Schmitt
    Hans Hasse
    Herbert M. Urbassek
    Friction, 2023, 11 : 2342 - 2366
  • [10] Single-Grade Engine Lubricant: Introduce Viscosity Index Numerical Order (VIno)
    Adibah, A.
    Inayatullah, O.
    Ujila, M. S.
    Nuraini, A. A.
    Barkawi, S.
    Nordin, J.
    ADVANCES IN MECHANICAL AND MANUFACTURING ENGINEERING, 2014, 564 : 83 - +