Effect of solidification of mold fluxes on the heat transfer in casting mold

被引：62
|
作者：
Cho, JW
Shibata, H
机构：
[1] Pohang Iron & Steel Co Ltd, Kwangyang Iron & Steelmaking Res Grp, Kwangyang 545090, Cheonnam, South Korea
[2] Tohoku Univ, Inst Adv Mat Proc, Aoba Ku, Sendai, Miyagi 98077, Japan
来源：
JOURNAL OF NON-CRYSTALLINE SOLIDS | 2001年 / 282卷 / 01期
关键词：
D O I：
10.1016/S0022-3093(01)00333-7
中图分类号：
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
Crystallization of molten mold flux film has been observed using a confocal scanning laser microscope (CSLM) with an infrared furnace. The observation has indicated that mold flux of larger basicity (CaO/SiO2 = 1.41) starts crystallizing directly in liquid phase at temperatures >1373 K, and shows a faster growth rate of crystalline than that of smaller basicity (CaO/SiO2 = 0.96). Cross-section of solidified fluxes shows that the shrinkage due to the crystallization is more for larger basicity flux than for smaller one. This difference implies that thermal resistance at mold/mold flux film interface arises from the solidification and crystallization of the flux film, (C) 2001 Elsevier Science B.V. All rights reserved.
引用
收藏
页码：110 / 117
页数：8
相关论文
共 50 条
  • [1] Heat fluxes at metal-mold interface during casting solidification
    Sabau, Adrian S.
    [J]. LIGHT METALS 2006 VOL 4: CAST SHOP TECHNOLOGY AND RECYCLING - ALUMINUM, 2006, : 827 - 832
  • [2] The effect of crystallization of mold powder on the heat transfer in continuous casting mold
    Watanabe, K
    Suzuki, M
    Murakami, K
    Kondo, H
    Miyamoto, A
    Shiomi, T
    [J]. TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1997, 83 (02): : 115 - 120
  • [3] Mold Simulator Study of Heat Transfer Phenomenon During the Initial Solidification in Continuous Casting Mold
    Zhang, Haihui
    Wang, Wanlin
    [J]. METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, 2017, 48 (02): : 779 - 793
  • [4] Mold Simulator Study of Heat Transfer Phenomenon During the Initial Solidification in Continuous Casting Mold
    Haihui Zhang
    Wanlin Wang
    [J]. Metallurgical and Materials Transactions B, 2017, 48 : 779 - 793
  • [5] EFFECT OF MOLD TEMPERATURE ON HEAT TRANSFER COEFFICIENT AT CASTING-MOLD INTERFACE
    Akar, Neset
    Boran, Kurtulus
    Hozikligil, Bahadir
    [J]. JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY, 2013, 28 (02): : 275 - 282
  • [6] Heat transfer across mold flux film in mold during initial solidification in continuous casting of steel
    Cho, JW
    Emi, T
    Shibata, H
    Suzuki, M
    [J]. ISIJ INTERNATIONAL, 1998, 38 (08) : 834 - 842
  • [7] Heat transfer in permanent mold casting
    Nguyen, T
    Gunasegaram, D
    Luo, L
    Esdaile, R
    [J]. ADVANCES IN ALUMINUM CASTING TECHNOLOGY, 1998, : 191 - 197
  • [8] Transient Simulation of Mold Heat Transfer and Solidification Phenomena of Continuous Casting of Steel
    El-Bealy, Mostafa Omar
    [J]. METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, 2016, 47 (05): : 3013 - 3038
  • [9] Transient Simulation of Mold Heat Transfer and Solidification Phenomena of Continuous Casting of Steel
    Mostafa Omar El-Bealy
    [J]. Metallurgical and Materials Transactions B, 2016, 47 : 3013 - 3038
  • [10] Finite Point Method for the Simulation of Solidification and Heat Transfer in Continuous Casting Mold
    张雷
    康进武
    沈厚发
    黄天佑
    [J]. Tsinghua Science and Technology, 2004, (05) : 570 - 573
12345