Fatigue safety factors for the tensile and pressure armours of flexible risers

被引：0

作者：

Leira, Bernt J. ^{[1
]}

Igland, Ragnar T. ^{[1
]}

Ye, Naiquan ^{[1
]}

Passano, Elizabeth A. ^{[1
]}

机构：

[1] NTNU, Dept Marine Technol, N-7491 Trondheim, Norway

来源：

Proceedings of the 26th International Conference on Offshore Mechanics and Arctic Engineering, Vol 2 | 2007年

关键词：

D O I：

暂无

中图分类号：

U6 [水路运输]; P75 [海洋工程];

学科分类号：

0814 ; 081505 ; 0824 ; 082401 ;

摘要：

In the present paper, fatigue safety factors for metallic layers of flexible risers are assessed. A procedure for reliability analysis of wave-induced fatigue is first described. The procedure is based on performing a number of parametric studies with respect to variables that influence the fatigue lifetime. The results of these parametric studies are subsequently combined with models describing the statistical scatter of the same parameters. By application of this procedure, the safety factors which are required in order to reach specific target reliability levels can be computed. Example of calculation of such safety factors for the tensile and pressure armours of some specific flexible riser configurations are given. Different SN-curves which correspond to different corrosive environments are considered. The percentwise contribution from each parameter to the total statistical variation of the limit state function is also quantified.

引用

页码：323 / 329

页数：7

共 50 条

[1] Hybrid composite wires for tensile armours in flexible risers: Manufacturing and mechanical characterisation
Gautam, M.
Potluri, P.
Katnam, K. B.
Jha, V.
Leyland, J.
Latto, J.
Dodds, N.
[J]. COMPOSITE STRUCTURES, 2016, 150 : 73 - 83
[2] A framework for reliability-based fatigue safety factors for flexible risers
Leira, B. J.
Farnes, K. A.
Igland, R. T.
Martin, J.
Percy, D.
Lemos, C.
Clements, R.
Nedrelid, K.
[J]. Proceedings of the 26th International Conference on Offshore Mechanics and Arctic Engineering, Vol 1, 2007, : 603 - 611
[3] Fatigue safety factors for flexible risers based on case specific reliability analysis
Leira, Bernt J.
Igland, Ragnar T.
Baarholm, Gro S.
Farnes, Knut A.
Percy, Dick
[J]. Proceedings of the 24th International Conference on Offshore Mechanics and Arctic Engineering, Vol 2, 2005, : 211 - 217
[4] MULTIPLE AXIAL FATIGUE OF PRESSURE ARMORS IN FLEXIBLE RISERS
Ye, Naiquan
Saevik, Svein
[J]. OMAE2011: PROCEEDINGS OF THE ASME 30TH INTERNATIONAL CONFERENCE ON OCEAN, OFFSHORE AND ARCTIC ENGINEERING, VOL 4: PIPELINE AND RISER TECHNOLOGY, 2011, : 943 - +
[5] TECHNIQUES FOR PREDICITING TENSILE ARMOUR BUCKLING AND FATIGUE IN DEEP WATER FLEXIBLE RISERS
Saevik, Svein
Thorsen, Mats J.
[J]. PROCEEDINGS OF THE ASME 31ST INTERNATIONAL CONFERENCE ON OCEAN, OFFSHORE AND ARTIC ENGINEERING, VOL 3, 2012, : 469 - 482
[6] Micromagnetic stress evaluation of flexible riser tensile armours
Martins, C. O. D.
Reguly, A.
[J]. INSIGHT, 2009, 51 (01) : 8 - +
[7] SHEAR INTERACTION AND TRANSVERSE BUCKLING OF TENSILE ARMOURS IN FLEXIBLE PIPES
Saevik, Svein
Li, Henan
[J]. PROCEEDINGS OF THE ASME 32ND INTERNATIONAL CONFERENCE ON OCEAN, OFFSHORE AND ARCTIC ENGINEERING - 2013, VOL 4A, 2013,
[8] AN IRREGULAR WAVE APPROACH TO FATIGUE LIFE CAPACITY FOR FLEXIBLE RISERS WITH SEVERED OR CORRODED TENSILE ARMORS
Doynov, Krassimir
Cooke, Nathan
Pasala, Dharma
Majed, Arya
[J]. PROCEEDINGS OF ASME 2023 42ND INTERNATIONAL CONFERENCE ON OCEAN, OFFSHORE & ARCTIC ENGINEERING, OMAE2023, VOL 3, 2023,
[9] A review of fatigue analysis of marine flexible risers
Pan, Yi
Zheng, Longxiang
Yang, Shuangchun
Wang, Yanchao
[J]. Geoenergy Science and Engineering, 2025, 246
[10] FAT PRESSURE IMPACT ON RESIDUAL STRESS IN FLEXIBLE PIPE PRESSURE ARMOURS
Sautreuil, Dorine
Deheeger, Antoine
Wang, Howard
[J]. PROCEEDINGS OF ASME 2023 42ND INTERNATIONAL CONFERENCE ON OCEAN, OFFSHORE & ARCTIC ENGINEERING, OMAE2023, VOL 3, 2023,

← 1 2 3 4 5 →