Evaluation of drilling hydraulic calculation to the ability of bottom hole cleaning

被引:1
|
作者
Widiyatni, H. [1 ]
Rizkina, A. [1 ]
Dirastri, W., I [1 ]
机构
[1] Univ Trisakti, Fac Earth Sci & Energy, Petr Engn Dept, Jakarta, Indonesia
来源
4TH ANNUAL APPLIED SCIENCE AND ENGINEERING CONFERENCE, 2019 | 2019年 / 1402卷
关键词
D O I
10.1088/1742-6596/1402/5/055109
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
In drilling operation there are two important matters that must be considered, which are the pumps and drilling fluid rheology that are influencing hydraulics drilling system. The major function of drilling fluid is to lift the drill cutting to the surface and still maintain the drilling hole to avoid an encounter. Evaluation of hydraulics drilling for bottom hole cleaning will count the parameter success which influence in removal of cutting to the surface for bottom hole cleaning and optimization drilling calculation hydraulics. The velocity of drilling fluid in annular, the flow that is formed and the ability of bottom hole cleaning are highly influenced by specifications of mud pump as a resource power for mud to flow that also will determine how the value of flow rate can be circulated. Mud rheology, PV, YP and MW will influence the performance of mud to carry cutting on drilling operation. The penetration to formation rock will make the broken bits of solid material removed from a borehole drilled by bit and resulting the drill cuttings. These cuttings could settle on the bottom of borehole so the main purpose of drilling fluid is to carry the cuttings to the surface, besides the drilling fluid also protecting borehole condition from any drilling problems. This evaluation is using Power Law Model for calculate pressure losses, drilling hydraulic optimization and also observe the parameter of Cutting Transport Ratio (Ft), Cutting Concentration (Ca), Cutting Carrying Index (CCI) and Particle Bed Index (PBI). The optimization results from Bit Hydraulic Horse Power (BHHP) method produce significant changes which are percentage horse power delivered to bit (%HHP) increasing to 53.17 - 54.79 % from actual condition which only ranges 5 - 51 %. Q optimum is very influential on the value of bit hydraulic horse power (BHHP) and surface horse power (HPS) that provide more optimized power to pump the mud with minimize the effect of pressure loss.
引用
收藏
页数:6
相关论文
共 50 条
  • [1] NATURE OF DESTRUCTION AND CLEANING OF A BOTTOM HOLE SURFACE COVERED WITH DRILLING MUD
    DASHEVSKII, AS
    TSUKALOV, AI
    NEFTYANOE KHOZYAISTVO, 1983, (04): : 30 - 33
  • [2] Study on the Mechanism of Bottom Hole Hydraulic Pulse Increasing Drilling Rate
    Ni Hongjian
    Wang Ruihe
    Song Weiqiang
    Song Huifang
    PROGRESS IN POWER AND ELECTRICAL ENGINEERING, PTS 1 AND 2, 2012, 354-355 : 621 - 626
  • [3] A DRILLING MODEL-BASED ON COUPLING BETWEEN ROCK CRUSHING EFFECTS AND BOTTOM-HOLE HYDRAULIC CLEANING OF CUTTINGS (SOLID BALANCE)
    PUTOT, C
    REVUE DE L INSTITUT FRANCAIS DU PETROLE, 1995, 50 (04): : 491 - 516
  • [4] HYDRAULIC PROGRAMS FOR MAXIMUM HYDRAULIC HORSEPOWER AND IMPACT FORCE ON THE ROCK SURFACE OF THE HOLE BOTTOM IN JET DRILLING.
    Zhang, Shao-Huai
    Yao, Cai-Yin
    SPE Drilling Engineering, 1988, 3 (01): : 63 - 68
  • [5] IMPROVEMENT OF BOTTOM HOLE AIR CLEANING TO REDUCE ACCIDENT RATE OF WELL DRILLING AT KUYUMBINSKOE OILFIELD
    Buzanov, Kirill, V
    Borisov, Konstantin, I
    BULLETIN OF THE TOMSK POLYTECHNIC UNIVERSITY-GEO ASSETS ENGINEERING, 2020, 331 (02): : 92 - 101
  • [6] Improvement of hole cleaning of drilling fines
    Katanov, B.A.
    Gornyi Zhurnal, 2002, (06): : 64 - 66
  • [7] ELECTROMECHANICAL CORE DRILLING TOOL ON A CARRYING CABLE FOR CLEANING BOTTOM-HOLE ZONES OF OIL WELLS
    Stadoid, S. S.
    JOURNAL OF MINING INSTITUTE, 2007, 173 : 105 - 108
  • [8] EVALUATION OF DRILLING-FLUID PERFORMANCE UNDER SIMULATED BOTTOM HOLE CONDITIONS
    ALMARHOUN, MA
    RAHMAN, SS
    ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING, 1988, 13 (03): : 343 - 353
  • [9] Application of Hole-cleaning Simulation for Drilling
    /Liu Zhengyu and Sun Xingyun(University of Petroleum
    ChinaOil&Gas, 1995, (04) : 23 - 25
  • [10] Optimal Design of Magnetic Torque for a Hydraulic-Magnetic Rotary Hole Cleaning Tool in Horizontal Drilling
    Sun Xiao-feng
    Hu, Qiao-bo
    Qu, Jingyu
    Li, Wei
    Mao, Ning
    Ju, Guoshuai
    SPE DRILLING & COMPLETION, 2021, 36 (04) : 888 - 899