Stereo-DIC Uncertainty Quantification based on Simulated Images

被引：40

作者：

Balcaen, R. ^{[1
]}

Reu, P. L. ^{[2
]}

Lava, P. ^{[3
]}

Debruyne, D. ^{[1
]}

机构：

[1] Katholieke Univ Leuven, Dept Mat Technol, Campus Ghent,Gebroeders Desmetstr 1, B-9000 Ghent, Belgium

[2] Sandia Natl Labs, POB 5800, Albuquerque, NM 87185 USA

[3] MatchID, Wijmenstr 21T, B-9000 Ghent, Belgium

来源：

EXPERIMENTAL MECHANICS | 2017年 / 57卷 / 06期

关键词：

Digital image correlation; Uncertainty quantification; Error assessment; Optical techniques; ERROR ASSESSMENT; STRAIN;

D O I：

10.1007/s11340-017-0288-9

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Stereo digital image correlation (stereo-DIC) is in wide-spread use for full-field shape, motion and deformation-measurements. However there are very few papers investigating the influence of the setup on the measurement uncertainty. This is mainly due to the highly non-linear measurement chain involving both optical and numerical aspects, making it difficult to investigate how error sources are propagated through the stereo-DIC chain. Indeed, it is impossible to separate all the error sources that are present during a physical measurement. This paper tries to investigate a selection of error sources that are present during experiments. This is based on a simulator introduced in a previous article (Balcaen et al., Exp Mech, 1-16 2017) and briefly reviewed here. Based on these simulations we suggest some "best-practices" guidelines of optimal stereo-DIC setups.

引用

页码：939 / 951

页数：13

共 50 条

[1] Stereo-DIC Uncertainty Quantification based on Simulated Images
R. Balcaen
P.L. Reu
P. Lava
D. Debruyne
Experimental Mechanics, 2017, 57 : 939 - 951
[2] CAD-based Displacement Measurements with Stereo-DIC
Dufour, John-Eric
Beaubier, Benoit
Hild, Francois
Roux, Stephane
EXPERIMENTAL MECHANICS, 2015, 55 (09) : 1657 - 1668
[3] Evaluation of Camera Motion in Stereo-DIC
Balcaen, R.
Reu, P. L.
Lava, P.
Debruyne, D.
INTERNATIONAL DIGITAL IMAGING CORRELATION SOCIETY, 2017, : 1 - 3
[4] Stereo-DIC Uncertainty Estimation Using the Epipolar Constraint and Optimized Three Camera Triangulation
R. Balcaen
P. L. Reu
D. Debruyne
Experimental Techniques, 2018, 42 : 115 - 120
[5] Displacement Measurements Using CAD-Based Stereo-DIC
Dufour, J. -E.
Beaubier, B.
Hild, F.
Roux, S.
ADVANCEMENT OF OPTICAL METHODS IN EXPERIMENTAL MECHANICS, VOL 3, 2015, : 303 - 307
[6] Stereo-DIC Uncertainty Estimation Using the Epipolar Constraint and Optimized Three Camera Triangulation
Balcaen, R.
Reu, P. L.
Debruyne, D.
EXPERIMENTAL TECHNIQUES, 2018, 42 (01) : 115 - 120
[7] Stereo-DIC Calibration and Speckle Image Generator Based on FE Formulations
Balcaen, R.
Wittevrongel, L.
Reu, P. L.
Lava, P.
Debruyne, D.
EXPERIMENTAL MECHANICS, 2017, 57 (05) : 703 - 718
[8] Stereo-DIC Calibration and Speckle Image Generator Based on FE Formulations
R. Balcaen
L. Wittevrongel
P. L. Reu
P. Lava
D. Debruyne
Experimental Mechanics, 2017, 57 : 703 - 718
[9] A morphing-based scheme for large deformation analysis with stereo-DIC
Genovese, Katia
Sorgente, Donato
OPTICS AND LASERS IN ENGINEERING, 2018, 104 : 159 - 172
[10] Influence of Camera Rotation on Stereo-DIC and Compensation Methods
Balcaen, R.
Reu, P. L.
Lava, P.
Debruyne, D.
EXPERIMENTAL MECHANICS, 2018, 58 (07) : 1101 - 1114

← 1 2 3 4 5 →