Effect of molecular weight distribution on polymer diffusion during film formation of two-component high-/low-molecular weight latex particles

被引:17
|
作者
Soleimani, Mohsen [2 ]
Khan, Sheraz
Mendenhall, David [4 ]
Lau, Willie [3 ]
Winnik, Mitchell A. [1 ,2 ]
机构
[1] Univ Toronto, Lash Miller Chem Labs, Dept Chem, Toronto, ON M5S 3H6, Canada
[2] Univ Toronto, Dept Chem Engn, Toronto, ON M5S 3E5, Canada
[3] Dow Chem Co USA, Dow Adv Mat, Spring House, PA 19477 USA
[4] Eastern Sources Inc, Elmsford, NY 10523 USA
基金
加拿大自然科学与工程研究理事会;
关键词
Latex film formation; Two-component particles; Plasticizers; CO-METHYL METHACRYLATE); EMULSION COPOLYMERIZATION; DYNAMIC HETEROGENEITY; MISCIBLE BLENDS; ENERGY-TRANSFER; COALESCING AID; BUTYL ACRYLATE; VINYL-ACETATE; TERT-BUTYL; DEPENDENCE;
D O I
10.1016/j.polymer.2011.12.012
中图分类号
O63 [高分子化学(高聚物)];
学科分类号
070305 ; 080501 ; 081704 ;
摘要
We describe fluorescence resonance energy transfer (FRET) studies of film formation by a new type of two-component latex particles. These particles consist of a miscible blend of two components that have a similar composition but very different molecular weights. In our approach, we used sequential seeded emulsion polymerization to generate (in situ) a fraction of oligomer in poly(butyl acrylate-co-methyl methacrylate) P(BA-MMA) seed particles that contained a relatively high molecular weight (high-M) dye-labeled polymer. In this way we could systematically change the molecular weight distribution of polymer inside the particles. We varied the amount and the molecular weight of the oligomers. For latex films cast from these two-component particles, we studied the diffusion rate of the high molecular weight polymer by FRET. These measurements revealed that oligomers promoted diffusion rate during latex film formation (oligoplasticization). We analyzed our diffusion data in terms of the Fujita-Doolittle free-volume model and showed that higher molecular weight oligomers are less efficient as plasticizers. In separate experiments, oligomers with similar molecular weights as those in the two-component particles were introduced via latex blending. We compared oligoplasticization in latex blends films with that in the two-component particles films. Finally, we investigated the rheological behavior of the two-component polymers with compositions adjusted to have a common T-g (2 degrees C). The higher the molecular weight of the oligomer, the more that had to be added to achieve T-g = 2 degrees C. All of the oligomers were much shorter than the entanglement length and act as diluents of the entanglements in the high-M polymer. We found that incorporating larger amounts of oligomers with a higher molecular weight resulted in a more pronounced drop in polymer viscosity, associated with the decrease in the entanglement density. (c) 2012 Published by Elsevier Ltd.
引用
收藏
页码:2652 / 2663
页数:12
相关论文
共 50 条