Dosimetric characterization of 3D-printed electron compensator: an analysis of printing parameters

被引：0
|
作者：
Biltekin, F. [1 ]
Yazici, G. [1 ]
Ozyigit, G. [1 ]
机构：
[1] Hacettepe Univ, Fac Med, Dept Radiat Oncol, Ankara, Turkey
来源：
RADIOTHERAPY AND ONCOLOGY | 2021年 / 161卷
关键词：
D O I：
暂无
中图分类号：
R73 [肿瘤学];
学科分类号：
100214 ;
摘要：
PO-1627
引用
收藏
页码：S1347 / S1348
页数：2
相关论文
共 50 条
  • [1] 3D-printed boluses for radiotherapy: influence of geometrical and printing parameters on dosimetric characterization and air gap evaluation
    Gugliandolo, Simone Giovanni
    Pillai, Shabarish Purushothaman
    Rajendran, Shankar
    Vincini, Maria Giulia
    Pepa, Matteo
    Pansini, Floriana
    Zaffaroni, Mattia
    Marvaso, Giulia
    Alterio, Daniela
    Vavassori, Andrea
    Durante, Stefano
    Volpe, Stefania
    Cattani, Federica
    Jereczek-Fossa, Barbara Alicja
    Moscatelli, Davide
    Colosimo, Bianca Maria
    RADIOLOGICAL PHYSICS AND TECHNOLOGY, 2024, 17 (02) : 347 - 359
  • [2] Characterization of 3D-printed bolus produced at different printing parameters
    Biltekin, Fatih
    Yazici, Gozde
    Ozyigit, Gokhan
    MEDICAL DOSIMETRY, 2021, 46 (02) : 157 - 163
  • [3] Retrospective dosimetric analysis of 3D-printed bolus
    Dewit, B.
    Depuydt, T.
    RADIOTHERAPY AND ONCOLOGY, 2023, 182 : S1535 - S1536
  • [4] Dosimetric Validation of 3D-Printed Bolus at Different Printing Infill Percentage in VMAT Plan
    Zhang, T.
    Zhao, L.
    Wang, Z.
    Sun, X. H.
    Wang, W.
    Duan, J.
    Chen, L. T.
    INTERNATIONAL JOURNAL OF RADIATION ONCOLOGY BIOLOGY PHYSICS, 2023, 117 (02): : E746 - E746
  • [5] Influence of printing parameters on the thermal properties of 3D-printed construction structures
    Sovetova M.
    Calautit J.K.
    Energy, 2024, 305
  • [6] Surface Quality of 3D-Printed Models as a Function of Various Printing Parameters
    Arnold, Christin
    Monsees, Delf
    Hey, Jeremias
    Schweyen, Ramona
    MATERIALS, 2019, 12 (12)
  • [7] Discovering the Impact of Printing Parameters on the Crashworthiness Performance of 3D-Printed Cellular Structures
    Mahmoud M. Awd Allah
    Mahmoud F. Abd El-Halim
    Mohamed A. Abbas
    Ali Saeed Almuflih
    Dalia I. Saleh
    Marwa A. Abd El-baky
    Fibers and Polymers, 2025, 26 (1) : 297 - 315
  • [8] Characterization of 3D-printed filament yarns using various parameters
    Kim, Minseo
    Kim, Han Seong
    JOURNAL OF THE TEXTILE INSTITUTE, 2024,
  • [9] Characterization of 3D-printed PLA parts with different raster orientations and printing speeds
    Khosravani, Mohammad Reza
    Berto, Filippo
    Ayatollahi, Majid R.
    Reinicke, Tamara
    SCIENTIFIC REPORTS, 2022, 12 (01)
  • [10] Characterization of 3D-printed PLA parts with different raster orientations and printing speeds
    Mohammad Reza Khosravani
    Filippo Berto
    Majid R. Ayatollahi
    Tamara Reinicke
    Scientific Reports, 12
12345