Effect of tin alloying on corrosion and mechanical properties of ferritic and metastable austenitic steels

被引：0

作者：

Merkushkin, Evgeny ^{[1
]}

Berezovskaya, Vera ^{[1
]}

Serzhanin, Mikhail ^{[1
]}

Kirillova, Alexandra ^{[1
]}

机构：

[1] Ural Fed Univ, St Mira 19, Ekaterinburg 620002, Russia

来源：

MATERIALS TODAY-PROCEEDINGS | 2019年 / 19卷

关键词：

Stainless steel; Tin alloying; Pitting corrosion; Mechanical properties in corrosive environment; Pitting potential;

D O I：

10.1016/j.matpr.2019.07.546

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Pitting corrosion and mechanical properties studies were carried out on ferritic (FSS) and metastable austenitic stainless steels (MASS) with different tin contents. It is shown that an increase in the tin content does not affect the pitting formation potential (E-b) of FSS. Whereas for MASS with tin content increasing Eb decreases. The change in the tin content does not have a significant effect on the tensile strength (sigma(B)) and yield strength (sigma(0,2)) of investigated steels in air. With an increase in the tin content of MASS, a slight decrease in the relative elongation (delta) was observed in air. (C) 2019 Elsevier Ltd. All rights reserved.

引用

页码：2252 / 2254

页数：3

共 50 条

[1] Mechanical Alloying and Properties of ODS Ferritic Steels
Ahn, Jung-Ho
Lee, Sanghyun
Jang, Jinsung
[J]. THERMEC 2006 SUPPLEMENT: 5TH INTERNATIONAL CONFERENCE ON PROCESSING AND MANUFACTURING OF ADVANCED MATERIALS, 2007, 15-17 : 696 - 701
[2] Effect of nitrogen on the phase composition and mechanical properties of corrosion-resistant austenitic-ferritic steels
Aleksandrova, N.P.
[J]. Metal Science and Heat Treatment, 1988, : 138 - 141
[3] IMPROVEMENTS IN CORROSION RESISTANCE, MECHANICAL PROPERTIES, AND WELDABILITY OF DUPLEX AUSTENITIC/FERRITIC STEELS.
Clark, C.A.
Guha, P.
[J]. Werkstoffe und Korrosion, 1983, 34 (01): : 27 - 31
[4] THE EFFECT OF ADDITIONAL ALLOYING ON THE SERVICE STABILITY OF METASTABLE AUSTENITIC STEELS
CHERNYAK, SS
KOSTRUBOVA, II
ROMEN, BM
IVAKIN, VL
AGRYZKOV, LE
[J]. STEEL IN TRANSLATION, 1993, 23 (06) : 33 - 35
[5] EFFECT OF NITROGEN ON THE PHASE-COMPOSITION AND MECHANICAL-PROPERTIES OF CORROSION-RESISTANT AUSTENITIC FERRITIC STEELS
ALEKSANDROVA, NP
[J]. METAL SCIENCE AND HEAT TREATMENT, 1988, 30 (1-2) : 138 - 141
[6] Effect of Microstructural Characteristics on Mechanical Properties of Austenitic, Ferritic, and - Duplex Stainless Steels
Okayasu, Mitsuhiro
Ishida, Daiki
[J]. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2019, 50A (03): : 1380 - 1388
[7] Effect of Microstructural Characteristics on Mechanical Properties of Austenitic, Ferritic, and γ-α Duplex Stainless Steels
Mitsuhiro Okayasu
Daiki Ishida
[J]. Metallurgical and Materials Transactions A, 2019, 50 : 1380 - 1388
[8] STABILITY AND MECHANICAL PROPERTIES OF SOME METASTABLE AUSTENITIC STEELS
BHANDARK.D
ZACKAY, VF
PARKER, ER
[J]. METALLURGICAL TRANSACTIONS, 1972, 3 (10): : 2619 - &
[9] IMPROVEMENTS IN CORROSION-RESISTANCE, MECHANICAL-PROPERTIES, AND WELDABILITY OF DUPLEX AUSTENITIC FERRITIC STEELS
CLARK, CA
GUHA, P
[J]. WERKSTOFFE UND KORROSION-MATERIALS AND CORROSION, 1983, 34 (01): : 27 - 31
[10] Corrosion fatigue problems in ferritic steels and austenitic steels
Khatak, HS
[J]. CORROSION AND ITS CONTROLS, VOLS I AND II, 1998, : 249 - 257

← 1 2 3 4 5 →