Solid transportation in the feeding zone of intermeshing co-rotating twin-screw extruders

A mathematical model was proposed for the characteristics of solid transportation in the feeding zone of an intermeshing co-rotating twin screw extruder. The model was based on the observations made from a "transparent" extruder. The analysis considered optimal solid conveyed with maximum throughput rate, i.e., when the upper and lower intermeshing zones, and the two sides of the screws were all partially filled with solid resin to an extent that a slight increase in the solid filling would immediately cause blocking of the solid transportation. Because of these starve-fed characteristics, the conventional approach for analysing solid feeding used in single-screw extruders was inadequate for twin-screw extruders. This paper also suggests a solution for the mathematical expressions describing the stress and velocity fields in the solid feeding zone of a twin-screw extruder. Finally, the predicted values are compared with our experimental findings.