Laser cutting of steel and thermal stress development

In laser cutting of sheet metals, thermal stresses are developed in the region of the cutting section. Depending on the cutting conditions and substrate material properties, the thermal stress levels can attain high values. In the present study, thermal stress developed in the region of the laser cut edges is modeled and temperature as well as stress fields are predicted. Temperature predictions are validated through the experimental results. It was found that the temporal variation of the maximum temperature along y-axis follows the laser heating source. However, temporal variation of von-Mises stress deviates slightly from the temporal variation of temperature along the cutting direction. Increase in scanning speed enhances the von-Mises stress levels due to the attainment of high temperature gradients in the substrate material. (C) 2010 Elsevier Ltd. All rights reserved.