Assessment of the possibility for substituting cast iron in vehicle brake disc with Aluminum-Based Metal-matrix composite material produced by internal oxidation

被引：2
|
作者：
Romanov, Ivan [1 ]
Chernyshov, Evgeny [1 ]
Romanov, Alexey [1 ]
机构：
[1] Nizhnii Novgorod State Tech Univ, Minin St 24, Nizhnii Novgorod 603950, Russia
来源：
MATERIALS TODAY-PROCEEDINGS | 2019年 / 19卷
关键词：
Aluminum; Composite material; Corundum; Metal-matrix composite materials; Cast iron;
D O I：
10.1016/j.matpr.2019.07.224
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
This paper describes the results of tests of aluminium-based metal-matrix composite materials (MMC) produced by internal oxidation. The results of wear of a MMC mock-up vehicle "brake disc" work-piece are stated herein based on dry friction tests depending on the MMC composition. The following tribotechnical tests were studied: testing of specimens to identify the friction coefficient for MMC-brake pad; testing of specimens to identify the wear in the MMC-brake pad system; the macro and microstructural analysis of specimens after testing. Based of the studies performed the conclusions were made about the possibility for substitution of cast iron C(sic)24 with MMC. (C) 2019 Elsevier Ltd. All rights reserved.
引用
收藏
页码：2125 / 2128
页数：4
相关论文
共 16 条
  • [1] Evaluation of the Possibility of Replacement of an SCh24 Cast Iron of Detail of a “Brake Disc” of a Car by an Aluminum-Based Dispersion-Strengthened Composition Material Prepared by Internal Oxidation
    E. A. Chernyshov
    A. D. Romanov
    I. D. Romanov
    L. A. Krivina
    I. N. Tsareva
    Journal of Machinery Manufacture and Reliability, 2021, 50 : 34 - 40
  • [2] Evaluation of the Possibility of Replacement of an SCh24 Cast Iron of Detail of a "Brake Disc" of a Car by an Aluminum-Based Dispersion-Strengthened Composition Material Prepared by Internal Oxidation
    Chernyshov, E. A.
    Romanov, A. D.
    Romanov, I. D.
    Krivina, L. A.
    Tsareva, I. N.
    JOURNAL OF MACHINERY MANUFACTURE AND RELIABILITY, 2021, 50 (01) : 34 - 40
  • [3] TRANSIENT INTERNAL DAMPING IN ALUMINUM-BASED METAL-MATRIX COMPOSITES
    VINCENT, A
    GIRARD, C
    LORMAND, G
    FOUGERES, R
    JOURNAL OF ALLOYS AND COMPOUNDS, 1994, 211 : 410 - 413
  • [4] Studying Tribotechnical and Thermophysical Properties of Aluminum Matrix Composite Material in Comparison with SCh24 Cast Iron to Evaluate the Possibility of Using This Alloy as a Material for Vehicle Brake Disc
    Romanov, A. D.
    Chernyshov, E. A.
    Romanova, E. A.
    Anokhin, A. S.
    Bykov, P. A.
    INORGANIC MATERIALS-APPLIED RESEARCH, 2021, 12 (04) : 1120 - 1123
  • [5] Studying Tribotechnical and Thermophysical Properties of Aluminum Matrix Composite Material in Comparison with SCh24 Cast Iron to Evaluate the Possibility of Using This Alloy as a Material for Vehicle Brake Disc
    A. D. Romanov
    E. A. Chernyshov
    E. A. Romanova
    A. S. Anokhin
    P. A. Bykov
    Inorganic Materials: Applied Research, 2021, 12 : 1120 - 1123
  • [6] CREEP OF DISPERSION REINFORCED ALUMINUM-BASED METAL-MATRIX COMPOSITE
    GREASLEY, A
    MATERIALS SCIENCE AND TECHNOLOGY, 1995, 11 (02) : 163 - 166
  • [7] On the Possibility of Using Secondary Alloys in the Production of Aluminum-Based Metal Matrix Composite
    Lattanzi, Lucia
    Jarfors, Anders E. W.
    Awe, Samuel A.
    CRYSTALS, 2024, 14 (04)
  • [8] THE EFFECT OF SUBGRAIN SIZE ON THE STATIC RECRYSTALLIZATION BEHAVIOR OF AN ALUMINUM-BASED METAL-MATRIX COMPOSITE
    FERRY, M
    MUNROE, PR
    SCRIPTA METALLURGICA ET MATERIALIA, 1995, 33 (06): : 857 - 862
  • [9] Development of Hot-Pressing Technology for Production of Aluminum-Based Metal-Matrix Composite Materials
    Gorbatyuk, S. M.
    Pashkov, A. N.
    Zarapin, A. Yu.
    Bardovskii, A. D.
    METALLURGIST, 2019, 62 (11-12) : 1261 - 1266
  • [10] Development of Hot-Pressing Technology for Production of Aluminum-Based Metal-Matrix Composite Materials
    S. M. Gorbatyuk
    A. N. Pashkov
    A. Yu. Zarapin
    A. D. Bardovskii
    Metallurgist, 2019, 62 : 1261 - 1266
12