Wear of alumina/zirconia nano-composite for ceramic/ceramic joint prostheses

被引:0
|
作者
Ikeuchi, K [1 ]
Morita, Y [1 ]
Nakata, K [1 ]
Kim, YH [1 ]
Sekino, T [1 ]
Niihara, K [1 ]
机构
[1] Kyoto Univ, Inst Frontier Med Sci, Kyoto 6068507, Japan
关键词
D O I
暂无
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
Wear properties of alumina, zirconia and alumina/zirconia nano-composite ceramics were investigated with two types of wear apparatus. An end face apparatus was used to measure wear between flat surfaces in distilled water. Results show that wear of alumina is lower than that of zirconia under poor lubrication conditions. According to the observed wear surfaces, adhesion and micro-ploughing are the major wear mechanism for zirconia. The wear rate under concentrated contact pressure was measured with a sphere on flat apparatus in bovine serum solution. In contrast to the former test, alumina shows higher wear rate than zirconia due to micro-cracking. Wear of alumina/zirconia nano-composite ceramic is lower than alumina and zirconia monolithic ceramics during both tests. In other words, the nano-composite ceramics shows higher wear resistance irrespective of lubrication conditions and contact pressure. It is concluded that the alumina/zirconia nano-composite ceramics have excellent properties for ceramic/ceramic joint prostheses.
引用
收藏
页码:257 / 261
页数:5
相关论文
共 50 条
  • [1] Tribological behaviour of an alumina toughened zirconia ceramic for an application in joint prostheses
    Begand, S
    Oberbach, T
    Glien, W
    [J]. BIOCERAMICS 18, PTS 1 AND 2, 2006, 309-311 : 1261 - 1264
  • [2] Investigations of the mechanical properties of an alumina toughened zirconia ceramic for an application in joint prostheses
    Begand, S
    Oberbach, T
    Glien, W
    [J]. BIOCERAMICS, VOL 17, 2005, 284-286 : 1019 - 1022
  • [3] Characterisation of wear debris from UHMWPE on zirconia ceramic, metal-on-metal and alumina ceramic-on-ceramic hip prostheses generated in a physiological anatomical hip joint simulator
    Tipper, JL
    Firkins, PJ
    Besong, AA
    Barbour, PSM
    Nevelos, J
    Stone, MH
    Ingham, E
    Fisher, J
    [J]. WEAR, 2001, 250 : 120 - 128
  • [4] A study on the properties of alunina-zirconia nano-composite infiltrated ceramic.
    Liao, YM
    Chen, YP
    Cen, YK
    [J]. JOURNAL OF DENTAL RESEARCH, 2003, 82 : 362 - 362
  • [5] Investigations of an alumina ceramic with zirconia gradient for the application as load bearing implant for joint prostheses
    Oberbach, T
    Ortmann, C
    Begand, S
    Glien, W
    [J]. BIOCERAMICS 18, PTS 1 AND 2, 2006, 309-311 : 1247 - 1250
  • [6] Wear properties of zirconia/alumina combination for joint prostheses
    Morita, Y
    Nakata, K
    Ikeuchi, K
    [J]. WEAR, 2003, 254 (1-2) : 147 - 153
  • [7] Wear Resistance of Nano ZrO2 Ceramic for Hip Joint Head Prostheses
    Qi Mengjia
    Wang Chen
    Dong Limin
    [J]. RARE METAL MATERIALS AND ENGINEERING, 2015, 44 : 381 - 383
  • [8] Wear Resistance of Nano-ZrO2 ceramic for Hip Joint Head Prostheses
    Wang, Chen
    Dong, Limin
    Zan, Qingfeng
    Guo, Peng
    Tian, Jiemo
    [J]. CHINESE CERAMICS COMMUNICATIONS, 2010, 105-106 : 175 - 178
  • [9] Synthesis and characterization of nano-composite alumina-titania ceramic membrane for gas separation
    Ahmad, A. L.
    Othman, M. R.
    Idrus, N. F.
    [J]. JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2006, 89 (10) : 3187 - 3193
  • [10] The Use of Nano-composite Ceramic Membranes for Gas Separations
    Shehu, Habiba
    Okon, Edidiong
    Gobina, Edward
    [J]. WORLD CONGRESS ON ENGINEERING, WCE 2015, VOL II, 2015, : 1225 - 1229