Investigation on microstructure and mechanical properties of Ti14 alloy after semisolid deformation

被引：5
|
作者：
Chen, Y. N. [1 ]
Wei, J. F. [2 ]
Zhao, Y. Q. [2 ]
机构：
[1] Changan Univ, Sch Mat Sci & Engn, Xian 710064, Peoples R China
[2] Xi An Jiao Tong Univ, State Key Lab Mech Behav Mat, Xian 710049, Peoples R China
来源：
MATERIALS SCIENCE AND TECHNOLOGY | 2011年 / 27卷 / 01期
关键词：
Microstructure; Mechanical properties; Titanium alloys; Thixoforging; TENSILE PROPERTIES; BEHAVIOR; STATE;
D O I：
10.1179/026708310X12635619988069
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
This study details the development of microstructure of Ti14 alloy as a function of the forging temperature and forging ratio in semisolid state and influence of resulting microstructure on the mechanical properties. The results reveal that dynamic recrystallisation occurred during semisolid forging, and the grain refinement was attained. Grain size increased in the forging temperature and decreased in the forging ratio. High ultimate tensile strengths and low elongation have been achieved after semisolid forging. The strength decreased with increasing forging temperature, while the ductility increased with increasing forging ratio. The relative contributions of tensile properties were attributed to the varieties of grain size obtained by thixoforging.
引用
收藏
页码：449 / 452
页数：4
相关论文
共 50 条
  • [1] Influence of semisolid forging ratio on the microstructure and mechanical properties of Ti14 alloy
    Yong-nan Chen
    Gang Liu
    Xue-min Zhang
    Yong-qing Zhao
    International Journal of Minerals, Metallurgy, and Materials, 2013, 20 : 266 - 272
  • [2] Influence of semisolid forging ratio on the microstructure and mechanical properties of Ti14 alloy
    Yong-nan Chen
    Gang Liu
    Xue-min Zhang
    Yong-qing Zhao
    International Journal of Minerals Metallurgy and Materials, 2013, 20 (03) : 266 - 272
  • [3] Influence of semisolid forging ratio on the microstructure and mechanical properties of Ti14 alloy
    Chen, Yong-nan
    Liu, Gang
    Zhang, Xue-min
    Zhao, Yong-qing
    INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS, 2013, 20 (03) : 266 - 272
  • [4] Microstructure and Mechanical Properties of Ti14 Alloy after Semi-Solid Deformation
    Chen Yongnan
    Wei Jianfeng
    Zhao Yongqing
    Qu Kepeng
    Wang Hui
    RARE METAL MATERIALS AND ENGINEERING, 2009, 38 (10) : 1822 - 1825
  • [5] Formability of Ti14 alloy during semisolid deformation
    Chen, Y. N.
    Liu, G.
    Zhao, Y. Q.
    Zhang, X. M.
    MATERIALS SCIENCE AND TECHNOLOGY, 2012, 28 (05) : 549 - 552
  • [6] Liquid Segregation Phenomenological Behaviors of Ti14 Alloy during Semisolid Deformation
    Chen, Y. N.
    Luo, C.
    Wei, J. F.
    Zhao, Y. Q.
    Xu, Y. K.
    ADVANCES IN MECHANICAL ENGINEERING, 2014,
  • [7] Tensile properties and microstructure of Ti14 alloy after semi-solid forging
    Chen Yong-nan
    Wei Jian-feng
    Zhao Yong-qing
    Zhang Xue-min
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2011, 21 (12) : 2610 - 2616
  • [8] Microstructure evolution of Ti14 alloy during semi-solid deformation
    Chen, Yong-Nan
    Wei, Jian-Feng
    Zhao, Yong-Qing
    Qu, Ke-Peng
    Wang, Hui
    Cailiao Rechuli Xuebao/Transactions of Materials and Heat Treatment, 2009, 30 (01): : 66 - 69
  • [9] Effect of semi-solid forging temperature on microstructure and mechanical properties of Ti14 alloy
    Chen, Y. N.
    Wei, J. F.
    Zhao, Y. Q.
    Sun, J.
    JOURNAL OF ALLOYS AND COMPOUNDS, 2009, 487 (1-2) : 314 - 320
  • [10] Research on the microstructure and grain boundary characteristic of Ti14 alloy after semi-solid deformation
    Chen Yongnan
    Wei Jianfeng
    Zhao Yongqing
    RARE METAL MATERIALS AND ENGINEERING, 2008, 37 (05) : 762 - 765
12345