Three-dimensional turbulent recirculating flow in a pipe with semi-circular orifice

被引:0
|
作者
Yasuoka, Y. [1 ]
Obi, S. [1 ]
机构
[1] Keio Univ, Dept Mech Engn, Kohoku Ku, 3-14-1 Hiyoshi, Yokohama, Kanagawa 2238522, Japan
关键词
D O I
10.1615/ICHMT.2015.THMT-15.310
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
Experimental study on the turbulent flow in a circular pipe with a semi-circular orifice has been conducted. The velocity was measured by a stereo PIV system that provided the three components of mean velocity in as well as six components of the Reynolds stress on the cross section of the pipe at different streamwise locations. The oncoming flow was confirmed to be a typical fully developed turbulent flow. The flow behind the semi-circular orifice was found to be strongly turbulent, associated with secondary flow. The ambiguity in the experiments was carefully addressed, and it was found that the measurement conducted either with or without the orifice was found to be equally accurate.
引用
收藏
页码:203 / 206
页数:4
相关论文
共 50 条
  • [1] Three-dimensional simulation of turbulent flow in a membrane tube filled with semi-circular baffles
    Jafarkhani, Mahboubeh
    Moraveji, Mostafa Keshavarz
    Davarnejad, Reza
    Moztarzadeh, Fathollah
    Mozafari, Masoud
    [J]. DESALINATION, 2012, 294 : 8 - 16
  • [2] THREE-DIMENSIONAL NUMERICAL INVESTIGATION OF TURBULENT FLOW AND HEAT TRANSFER INSIDE A HORIZONTAL SEMI-CIRCULAR CROSS-SECTIONED DUCT
    Arslan, Kamil
    [J]. THERMAL SCIENCE, 2014, 18 (04): : 1145 - 1158
  • [3] Direct numerical simulation of three-dimensional turbulent flows in a circular pipe
    Nikitin, N.V.
    [J]. Izvestiya Akademii Nauk. Mekhanika Zhidkosti I Gaza, 1994, (06): : 14 - 26
  • [4] Secondary motion in turbulent pipe flow with three-dimensional roughness
    Chan, L.
    MacDonald, M.
    Chung, D.
    Hutchins, N.
    Ooi, A.
    [J]. JOURNAL OF FLUID MECHANICS, 2018, 854 : 5 - 33
  • [5] THREE-DIMENSIONAL BIOMECHANICAL MODEL OF BENIGN PAROXYSMAL POSITIONAL VERTIGO IN THE SEMI-CIRCULAR CANAL
    Zdravkovic, Nebojsa
    Milosevic, Zarko
    Saveljic, Igor
    Nikolic, Dalibor
    Miloradovic, Vladimir
    Filipovic, Nenad
    [J]. TEHNICKI VJESNIK-TECHNICAL GAZETTE, 2017, 24 (06): : 1769 - 1775
  • [6] On the finite element simulation of three-dimensional semi-circular fatigue crack growth and closure
    Zhang, JZ
    Bowen, P
    [J]. ENGINEERING FRACTURE MECHANICS, 1998, 60 (03) : 341 - 360
  • [8] Enhancement of submicron particle deposition on a semi-circular surface in turbulent flow
    Xu, Haolun
    Fu, Sau Chung
    Leung, Wing Tong
    Lai, Tsz Wai
    Chao, Christopher Y. H.
    [J]. INDOOR AND BUILT ENVIRONMENT, 2020, 29 (01) : 101 - 116
  • [9] Flow structure in semi-circular cavity
    Okamoto S.
    Eshima S.
    Notani S.
    [J]. Nihon Kikai Gakkai Ronbunshu, B Hen/Transactions of the Japan Society of Mechanical Engineers, Part B, 2010, 76 (770): : 1481 - 1490
  • [10] Secondary Flow in Semi-Circular Ducts
    Larsson, I. A. S.
    Lindmark, E. M.
    Lundstrom, T. S.
    Nathan, G. J.
    [J]. JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME, 2011, 133 (10):