Influence of dynamic strain aging on plastic instability behaviour of near alpha titanium alloy Timetal 834

被引:5
|
作者
Prasad, K. [1 ]
机构
[1] Def Met Res Lab, Hyderabad 500058, Andhra Pradesh, India
关键词
Dynamic strain aging; Strain hardening exponent; Considere criterion; Tensile deformation; Timetal; 834; Plastic instability; FLOW BEHAVIOR; DEFORMATION; TEMPERATURE; FRACTURE; DAMAGE;
D O I
10.1179/174328408X302422
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
The deformation behaviour of near alpha titanium alloy Timetal 834 was investigated by analysing Considere criterion in temperature range between 300 and 500 degrees C at an interval of 25 degrees C. In the dynamic strain aging (DSA) regime (400-475 degrees C) studied in this material, Considere criterion was satisfied partially at peak DSA temperature (450 degrees C). This was attributed to maximum DSA effect at 450 degrees C which eventually resulted in specimen fracture at low ductility levels. Strain hardening exponent (n) values was determined using Ludwik plot, Considere criterion and obtained experimentally from uniform strain. The n values obtained from Ludwik plot and Considere criterion were greater than the uniform strain in DSA regime studied.
引用
收藏
页码:1068 / 1072
页数:5
相关论文
共 50 条
  • [1] Transient flow behaviour in a near alpha titanium alloy Timetal 834 in the dynamic strain aging regime
    Prasad, Kartik
    Kamat, S. V.
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2008, 490 (1-2): : 477 - 480
  • [2] Dynamic fracture toughness of a near alpha titanium alloy Timetal 834
    Prasad, Kartik
    Kamat, S. V.
    [J]. JOURNAL OF ALLOYS AND COMPOUNDS, 2010, 491 (1-2) : 237 - 241
  • [3] Effects of strain waveform on low cycle fatigue behaviour of near α Timetal 834 titanium alloy
    Prasad, Kartik
    Sarkar, Rajdeep
    Ghosal, P.
    Kumar, Vikas
    [J]. MATERIALS & DESIGN, 2011, 32 (03) : 1710 - 1715
  • [4] The influence of dynamic strain aging on the low cycle fatigue behavior of near alpha titanium alloy IMI 834
    Prasad, Kartik
    Sarkar, Rajdeep
    Ghosal, P.
    Varma, Vijay K.
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2008, 494 (1-2): : 227 - 231
  • [5] The prediction of fatigue life at notches in the near alpha titanium alloy Timetal 834
    Evans, WJ
    Bache, MR
    Nicholas, P
    [J]. INTERNATIONAL JOURNAL OF FATIGUE, 2001, 23 : S103 - S109
  • [6] Microstructural influences on fatigue crack growth in the near alpha titanium alloy Timetal 834
    Bache, MR
    [J]. SMALL FATIGUE CRACKS: MECHANICS, MECHANISMS, AND APPLICATIONS, 1999, : 179 - 186
  • [7] Fatigue crack growth behaviour of a near α titanium alloy Timetal 834 at 450 °C and 600 °C
    Prasad, Kartik
    Abhaya, S.
    Amarendra, G.
    Kumar, Vikas
    Rajulapati, K. V.
    Rao, K. Bhanu Sankara
    [J]. ENGINEERING FRACTURE MECHANICS, 2013, 102 : 194 - 206
  • [8] Effect of Strain Rate on Tensile Behaviour and Fracture Toughness of Timetal 834 Titanium Alloy at Ambient Temperature (08055)
    Prasad, Kartik
    Kamat, S. V.
    [J]. JOURNAL OF ADVANCED MATERIALS, 2009, 41 (01): : 64 - 73
  • [9] Influence of the primary α-grain size on the crack propagation behaviour of the titanium alloy TIMETAL 834 for application in compressor discs
    Kordisch, T
    Helm, D
    Nowack, H
    [J]. FATIGUE '99: PROCEEDINGS OF THE SEVENTH INTERNATIONAL FATIGUE CONGRESS, VOLS 1-4, 1999, : 2133 - 2138
  • [10] Dynamic strain aging in the intermediate temperature regime of near-α titanium alloy, IMI 834: Experimental and modeling
    Agrawal, Priyanka
    Karthikeyan, S.
    Makineni, Surendra Kumar
    Gault, Baptiste
    Banerjee, Dipankar
    [J]. ACTA MATERIALIA, 2022, 222