Anchoring and a load transfer technique in uniaxial tension of unidirectional high-strength composites

被引：9

作者：

Rytter, J ^{[1
]}

Portnov, G

Kulakov, V

机构：

[1] NKT Flexibles IS, Brondby, Denmark

[2] Latvian State Univ, Inst Polymer Mech, LV-1006 Riga, Latvia

来源：

MECHANICS OF COMPOSITE MATERIALS | 2005年 / 41卷 / 03期

关键词：

unidirectional composite; uniaxial tension; tensile strength; anchoring technique;

D O I：

10.1007/s11029-005-0049-1

中图分类号：

O3 [力学];

学科分类号：

08 ; 0801 ;

摘要：

A simplified analytical method for calculating the stress-strain state in uniaxial tension of unidirectional composite specimens with glued wedges is developed. A numerical analysis of the influence of geometry and mechanical parameters of the specimens on the maximum stresses is carried out. The calculations are refined by finite-element modeling. Tests of the specimens have proved the suitability of the suggested technique of anchoring and load transfer in uniaxial tension of unidirectional high-strength composites.

引用

页码：217 / 228

页数：12

共 50 条

[1] Anchoring and a Load Transfer Technique in Uniaxial Tension of Unidirectional High-Strength Composites
J. Rytter
G. Portnov
V. Kulakov
[J]. Mechanics of Composite Materials, 2005, 41 : 217 - 228
[2] A refined stress-strain analysis in the load transfer zone of flat specimens of high-strength unidirectional composites in uniaxial tension - 1. Theoretical analysis
Portnov, G. G.
Kulakov, V. L.
Arnautov, A. K.
[J]. MECHANICS OF COMPOSITE MATERIALS, 2006, 42 (06) : 547 - 554
[3] A refined stress-strain analysis in the load transfer zone of flat specimens of high-strength unidirectional composites in uniaxial tension 1. Theoretical analysis
G. G. Portnov
V. L. Kulakov
A. K. Arnautov
[J]. Mechanics of Composite Materials, 2006, 42 : 547 - 554
[4] A refined stress-strain analysis in the load transfer zone of flat specimens of high-strength unidirectional composites in uniaxial tension 3. Effect of grip misalignment
G. G. Portnov
V. L. Kulakov
A. K. Arnautov
[J]. Mechanics of Composite Materials, 2007, 43 : 503 - 512
[5] A refined stress-strain analysis in the load transfer zone of flat specimens of high-strength unidirectional composites in uniaxial tension - 3. Effect of grip misalignment
Portnov, G. G.
Kulakov, V. L.
Arnautov, A. K.
[J]. MECHANICS OF COMPOSITE MATERIALS, 2007, 43 (06) : 503 - 512
[6] High-strength concrete in uniaxial tension
Li, QB
Ansari, F
[J]. ACI MATERIALS JOURNAL, 2000, 97 (01) : 49 - 57
[7] A refined stress-strain analysis in the load transfer zone of flat specimens of high-strength unidirectional composites in uniaxial tension - 2. Finite-element parametric analysis
Portnov, G. G.
Kulakov, V. L.
Arnautov, A. K.
[J]. MECHANICS OF COMPOSITE MATERIALS, 2007, 43 (01) : 29 - 40
[8] A refined stress-strain analysis in the load transfer zone of flat specimens of high-strength unidirectional composites in uniaxial tension 2. Finite-element parametric analysis
G. G. Portnov
V. L. Kulakov
A. K. Arnautov
[J]. Mechanics of Composite Materials, 2007, 43 : 29 - 40
[9] The behavior of high-strength unidirectional composites under tension with superposed hydrostatic pressure
Zinoviev, PA
Tsvetkov, SV
Kulish, GG
van den Berg, RW
Van Schepdael, LJMM
[J]. COMPOSITES SCIENCE AND TECHNOLOGY, 2001, 61 (08) : 1151 - 1161
[10] Fabrication of high-strength porous SiC-based composites with unidirectional channels
Cao, Jiwei
Lu, Zhongliang
Miao, Kai
Zhao, Hongjiong
Xia, Yuanlin
Wang, Fu
Lu, Bingheng
[J]. JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2019, 102 (08) : 4888 - 4898

← 1 2 3 4 5 →