Determination of optimal parameters for SKD11 CNC turning process

被引：19

作者：

Tzeng, Chorng-Jyh ^{[1
]}

Yang, Yung-Kuang ^{[1
]}

机构：

[1] Minghsin Univ Sci & Technol, Dept Mech Engn, Hsinchu 304, Taiwan

来源：

MATERIALS AND MANUFACTURING PROCESSES | 2008年 / 23卷 / 3-4期

关键词：

ANOVA; CNC turning; DOE; optimization; SKD; 11;

D O I：

10.1080/10426910801937975

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

This study investigated the optimization of a CNC turning process for SKD11 (JIS). The design of experiments (DOE) method with an orthogonal array was applied. Nine experimental runs were performed based on the orthogonal array. The surface properties of roughness average and roughness maximum and the roundness were studied; the analysis of variance (ANOVA) was adapted to investigate which parameters had the most influence on the CNC turning process for SKD11 (JIS). Also, models for predictions of the roughness average, roughness maximum, and roundness had been developed in terms of cutting speed, feed rate, depth of cut, and the mixture ratio of cutting fluids.

引用

页码：363 / 368

页数：6

共 50 条

[1] Modeling and Optimization of Medium-Speed WEDM Process Parameters for Machining SKD11
Zhang, Guojun
Zhang, Zhen
Guo, Jianwen
Ming, Wuyi
Li, Mingzhen
Huang, Yu
[J]. MATERIALS AND MANUFACTURING PROCESSES, 2013, 28 (10) : 1124 - 1132
[2] SKD11模具钢
[J]. 热处理技术与装备, 2015, (02) : 20 - 20
[3] A Study on Determination of Coefficients of Cutting Force in Facing Process of SKD11 Steel Using the Circle Inserts
Nhu-Tung Nguyen
Tien-Dung Hoang
Thinh Bui Gia
Huu-Hung Nguyen
Tat-Tai Truong
[J]. PROCEEDINGS OF THE 3RD ANNUAL INTERNATIONAL CONFERENCE ON MATERIAL, MACHINES AND METHODS FOR SUSTAINABLE DEVELOPMENT, VOL 2, MMMS 2022, 2024, : 63 - 76
[4] SKD11冷作模具裂纹原因分析
雷淑梅
张成毅
匡同春
陈灵
陈丽凤
张美英
尹诗衡
[J]. 金属热处理, 2017, 42 (04) : 191 - 195
[5] SKD11模具钢开裂原因分析
李树华
张庆波
廖文忠
[J]. 理化检验-物理分册, 2002, (07) : 313 - 314
[6] Surface Roughness Prediction in Grinding Process of the SKD11 Steel by using Response Surface Method
Son, N. Hong
Trung, D. Duc
Nhu-Tung Nguyen
[J]. 2019 7TH INTERNATIONAL CONFERENCE ON MECHANICAL ENGINEERING, MATERIALS SCIENCE AND CIVIL ENGINEERING, 2020, 758
[7] Investigating the energy distribution of workpiece and optimizing process parameters during the EDM of Al6061, Inconel718, and SKD11
Ming, Wuyi
Zhang, Zhen
Wang, Shengyong
Huang, Hao
Zhang, Yanming
Zhang, Yong
Shen, Dili
[J]. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2017, 92 (9-12): : 4039 - 4056
[8] Effect of Sintering Parameters and Powder Characteristics on the Performance of Metal-Injection-Molded SKD11 Parts
Chen, Huan-Xi
Tsai, You-Tern
Lin, Kuan-Hong
[J]. WORLD CONGRESS ON ENGINEERING - WCE 2013, VOL III, 2013, : 1825 - +
[9] Investigating the energy distribution of workpiece and optimizing process parameters during the EDM of Al6061, Inconel718, and SKD11
Wuyi Ming
Zhen Zhang
Shengyong Wang
Hao Huang
Yanming Zhang
Yong Zhang
Dili Shen
[J]. The International Journal of Advanced Manufacturing Technology, 2017, 92 : 4039 - 4056
[10] The surface integrity in machining hardened steel SKD11 for die and mold
Chen, Ming
Jing, Lu-lu
Li, Xue-kun
[J]. MACHINING SCIENCE AND TECHNOLOGY, 2007, 11 (01) : 99 - 116

← 1 2 3 4 5 →