Energetic and exergetic investigation of a mixed flow dryer: A case study of maize grain drying

被引:36
|
作者
Mondal, Md. Hasan Tarek [1 ,2 ]
Hossain, Md Ayub [3 ]
Sheikh, Md. Abdul Momin [1 ]
Akhtaruzzaman, Md [1 ]
Sarker, Md. Sazzat Hossain [1 ]
机构
[1] Hajee Mohammad Danesh Sci & Technol Univ, Dept Food Engn & Technol, Dinajpur 5200, Bangladesh
[2] Dhaka Univ Engn & Technol, Dept Chem & Food Engn, Gazipur, Bangladesh
[3] Bangladesh Agr Res Inst, Farm Machinery & Postharvest Proc Engn Div, Gazipur, Bangladesh
关键词
Drying; energy and exergy analysis; maize grain; mixed flow dryer; FLUIDIZED-BED DRYER; NEURAL-NETWORK METHOD; HEAT-PUMP; MOISTURE DIFFUSIVITY; PERFORMANCE ANALYSIS; AIR-TEMPERATURE; CONSUMPTION; QUALITY; PADDY; SIMULATION;
D O I
10.1080/07373937.2019.1709077
中图分类号
TQ [化学工业];
学科分类号
0817 ;
摘要
Evolution of energetic and exergetic performance is an important concern for selecting suitable dryer for any drying process. This paper attempts to observe performance evaluation in terms of energy and exergy analysis of a mixed flow dryer for drying of freshly harvested maize grain. Existing models in regard to energy and exergy that were established by investigating the first law and second law of thermodynamics were applied for this study. Grain drying experiments executed for 40-80 degrees C drying temperature at 3.0 and 6.0 m/s air velocity. Energy utilization ratio decreased with increase of drying temperature at 3.0 m/s air velocity while differing surveillance was noticed for 70 and 80 degrees C at 6.0 m/s air velocity. Energy efficiency of the research mixed flow dryer vacillated from 26.52 to 71.75% over the temperature range. The magnitude of exergy inflow, exergy outflow and exergy loss varied as increasing trend with the upturn drying temperature. The analysis shows that exergy efficiency and exergetic improvement potential varied between 8.54 and 20.87% and between 0.81 and 11.12 kJ/s, respectively for mixed flow maize drying. Model equations that could aptly illustrate the energetic and exergetic parameters were developed as a function of drying temperature.
引用
收藏
页码:466 / 480
页数:15
相关论文
共 50 条
  • [1] Energetic and exergetic performances during drying of freshly harvested peanut with industrial mixed-flow dryer
    Yan, Jianchun
    Wei, Hai
    You, Zhaoyan
    Wu, Huichang
    Xu, Xiaowei
    Xie, Huanxiong
    ENERGY REPORTS, 2022, 8 : 7457 - 7467
  • [2] Investigation of grain mass flow in a mixed flow dryer
    Fabian Weigler
    Jochen Mellmann
    Particuology, 2014, 12 (01) : 33 - 39
  • [3] Investigation of grain mass flow in a mixed flow dryer
    Weigler, Fabian
    Mellmann, Jochen
    PARTICUOLOGY, 2014, 12 : 33 - 39
  • [4] Drying process optimisation in a mixed-flow batch grain dryer
    Jokiniemi, Heikki T.
    Ahokas, Jukka M.
    BIOSYSTEMS ENGINEERING, 2014, 121 : 209 - 220
  • [5] Drying characteristics of maize grain in solar bubble dryer
    Asemu, Aynadis M.
    Habtu, Nigus G.
    Delele, Mulugeta A.
    Subramanyam, Bhadriraju
    Alavi, Sajid
    JOURNAL OF FOOD PROCESS ENGINEERING, 2020, 43 (02)
  • [6] Drying characteristics, energetic and exergetic investigation during mixed-mode solar drying of pineapple slices at varied air mass flow rates
    Rani, Poonam
    Tripathy, P. P.
    RENEWABLE ENERGY, 2021, 167 (167) : 508 - 519
  • [7] Modeling of dehydration and color degradation kinetics of maize grain for mixed flow dryer
    Mondal, Hasan Tarek
    Akhtaruzzaman, Md
    Sarker, Md Sazzat Hossain
    JOURNAL OF AGRICULTURE AND FOOD RESEARCH, 2022, 9
  • [8] Energetic and exergetic analysis of a convective drier: A case study of potato drying process
    Golpour, Iman
    Kaveh, Mohammad
    Chayjan, Reza Amiri
    Guine, Raquel P. F.
    OPEN AGRICULTURE, 2020, 5 (01): : 563 - 572
  • [9] Energetic and exergetic analyses of Barnyard millet drying using continuous multistage fluidized bed dryer
    Devani, Yogendrasasidhar
    Yelamarthi, Pydi Setty
    JOURNAL OF FOOD PROCESS ENGINEERING, 2019, 42 (07)
  • [10] Grain velocity distribution in a mixed flow dryer
    Keppler, Istvan
    Kocsis, Laszlo
    Oldal, Istvan
    Farkas, Istvan
    Csatar, Attila
    ADVANCED POWDER TECHNOLOGY, 2012, 23 (06) : 824 - 832