The effect of anode flow characteristics and temperature on the performance of a direct methanol fuel cell

被引:85
|
作者
Amphlett, JC [1 ]
Peppley, BA [1 ]
Halliop, E [1 ]
Sadiq, A [1 ]
机构
[1] Royal Mil Coll Canada, Dept Chem & Chem Engn, Kingston, ON K7K 7B4, Canada
关键词
fuel cells/direct methanol; impedance spectroscopy (ac);
D O I
10.1016/S0378-7753(01)00490-6
中图分类号
O64 [物理化学(理论化学)、化学物理学];
学科分类号
070304 ; 081704 ;
摘要
An experimental direct methanol fuel cell (DMFC), designed and manufactured in-house, was used in this study. The cell is of standard filter-press configuration with parallel rectangular single-pass anode channels. The membrane electrode assembly (MEA), with a suitable Pt-Ru anode electrocatalyst, was purchased from E-TEK Inc. A 1.0 M methanol in water solution was used as the fuel and pure oxygen was used as the oxidant in all experiments. Three graphite anode plates were machined with the same Bow channel configuration but each with different depth of channels. The cathode was kept the same for all experiments. Polarisation curves and ac impedance spectra were obtained for varying temperatures and channel depths. To separate the contribution of the oxygen reduction reaction to the overvoltage from the: anode and membrane contributions, reference hydrogen electrode (RHE) measurements were taken. By comparing the RHE polarisation with the methanol-oxygen polarisation experiments, it was: found that polarisation losses at the oxygen cathode accounted for a 40-50% of the overpotential. The variation in the performance of the cell with flow of methanol/water mix, with temperature and with current density was studied. Polarisation measurements indicate that the medium channel depth flow channels performed better than either the shallow depth or deep depth how channels indicating that there is a complex relationship between the effect of Bow velocity and the influence of the: rate of production of product CO2. AC impedance spectroscopy measurements confirmed the observed polarisation results. This method proved to be able to provide a reliable indication of the performance of the cell even when the cell had not yet achieved steady-state. In the case of the shallow channel depth anode, ac impedance revealed that it required considerably longer to achieve steady-state than the time required for the medium and deep channel depths. (C) 2001 Elsevier Science B.V. All rights reserved.
引用
收藏
页码:204 / 213
页数:10
相关论文
共 50 条
  • [1] Effect of anode and cathode flow field design on the performance of a direct methanol fuel cell
    Oliveira, V. B.
    Rangel, C. M.
    Pinto, A. M. F. R.
    [J]. CHEMICAL ENGINEERING JOURNAL, 2010, 157 (01) : 174 - 180
  • [2] Effect of anode and cathode flow field geometry on passive direct methanol fuel cell performance
    Gholami, Omid
    Imen, S. Javad
    Shakeri, Mohsen
    [J]. ELECTROCHIMICA ACTA, 2015, 158 : 410 - 417
  • [3] Effect of anode backing layer on the cell performance of a direct methanol fuel cell
    Xu, C.
    Zhao, T. S.
    Ye, Q.
    [J]. ELECTROCHIMICA ACTA, 2006, 51 (25) : 5524 - 5531
  • [4] Model of the flow with bubbles in the anode channel and performance of a direct methanol fuel cell
    Kulikovsky, AA
    [J]. ELECTROCHEMISTRY COMMUNICATIONS, 2005, 7 (02) : 237 - 243
  • [5] The effect of temperature on the output characteristics of micro direct methanol fuel cell
    Yuan, Zhenyu
    Yang, Jie
    [J]. JOURNAL OF POWER SOURCES, 2015, 285 : 318 - 324
  • [6] The Effect of Cell Temperature and Channel Geometry on the Performance of a Direct Methanol Fuel Cell
    Omran, Mojtaba Parvizi
    Farhadi, Mousa
    Sedighi, Kurosh
    [J]. JOURNAL OF FUEL CELL SCIENCE AND TECHNOLOGY, 2011, 8 (06):
  • [7] Effect of Channel Depth and Cell Temperature on the Performance of a Direct Methanol Fuel Cell
    Alizadeh, Ebrahim
    Farhadi, Mousa
    Sedighi, Kurosh
    Shakeri, Mohsen
    [J]. JOURNAL OF FUEL CELL SCIENCE AND TECHNOLOGY, 2013, 10 (03):
  • [8] Effect of the Anode Structure on the Stability of a Direct Methanol Fuel Cell
    Jing, Fenning
    Sun, Ruili
    Wang, Suli
    Sun, Hai
    Sun, Gongquan
    [J]. ENERGY & FUELS, 2020, 34 (03) : 3850 - 3857
  • [9] A Shared Anode Flow Field for Direct Methanol Fuel Cell with Enhanced Performance and Decreased Volume
    Liu, Yang
    Gan, Haibo
    Qin, Bin
    Sun, Hai
    Sun, Gongquan
    [J]. ENERGY TECHNOLOGY, 2024,
  • [10] Effect of anode flow field design on the performance of liquid feed direct methanol fuel cells
    Yang, H
    Zhao, TS
    [J]. ELECTROCHIMICA ACTA, 2005, 50 (16-17) : 3243 - 3252