HIGH-TEMPERATURE OXIDATION KINETICS OF ADDITIVELY MANUFACTURED NITIHF

Viii-based high-temperature shape memory alloys (HTSMAs) such as NiTiHf have been utilized in a broad range of applications due to their high strength and work output, as well as, their ability to increase the transformation temperatures (TTs). Recently, additive manufacturing techniques (AM) have been widely used to fabricate complex shape memory alloy components without any major modifications or tooling and has paved the way to tailor the manufacturing and fabrications of microstructure and critical properties of their final parts. NiTi alloys properties such as transformation temperatures can be significantly altered due to oxidation, which can occur during the manufacturing process or post-processing. In this work the oxidation behavior of Ni-rich Ni7120Hf shape memory alloys, which was fabricated by the selective laser melting (SLM) method, is evaluated. Thermogravimetric analysis (TGA) is used to assess the kinetic behavior of the oxidation at different temperature ranges of 500, 700, and 900 degrees C for 20 hours in the air. After oxidation, to evaluate the microstructure and chemical composition X-ray diffraction (XRD), scanning electron microscopy (SEM), and energy-dispersive X-ray spectroscopy (EDS) was conducted the isothermal oxidation kinetics of conventional NiTi20Hf alloys were studied, and the results were compared to AM samples. Results show a two-stage oxidation rate at which oxidation increased with the high rate at the initial stage. As the oxidation time increased, the oxidation rate gradually decreased The oxidation behavior of NiTiHf alloys initially obeyed logarithmic rate law and then followed by parabolic rate law SEM results showed the formation of a multilayered oxide scale, including TiO2, NiTiO3, and Hf oxide.