The Relationship between the Distribution Characteristics of Cutting Speed at the Contact-point and the Surface Quality of Gear Teeth

被引：2
|
作者：
Liang, Guoxing [1 ]
Lv, Ming [1 ]
Gao, Xiaoxu [1 ]
机构：
[1] Taiyuan Univ Technol, Dept Mech Engn, Taiyuan 030024, Peoples R China
来源：
SURFACE FINISHING TECHNOLOGY AND SURFACE ENGINEERING II | 2010年 / 135卷
关键词：
Honing gear machining; Cutting speed; Roughness value; Surface quality;
D O I：
10.4028/www.scientific.net/AMR.135.128
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
In the paper, the vector expression of cutting speed on the contact-points has been obtained by the coordinate transformation. The cutting speed is the contact-point position function which is correlated with contact-line in the process of honing gear. It is diverse along the direction of the tooth depth, so the surface texture of workpiece gear has a visible difference from the top to the root of the tooth. It is showed in the results that the surface roughness value of same tooth has further increscent differences with the increasing honing speed, and the surface of tooth is in the same quality.
引用
收藏
页码：128 / 133
页数：6
相关论文
共 27 条
  • [1] Analysis of Dynamic Contact Characteristics of High-speed Train Transmission Gear Considering the Influence of Sliding between the Teeth
    Xiao Q.
    Wang D.
    Chen D.
    Zhu H.
    Jixie Gongcheng Xuebao/Journal of Mechanical Engineering, 2021, 57 (10): : 87 - 94
  • [2] Nonlinear dynamic characteristics of a spur gear pair considering extended tooth contact and coupling effect between gear neighboring teeth
    Zhengfa Li
    Zaigang Chen
    Wanming Zhai
    Nonlinear Dynamics, 2023, 111 : 2395 - 2414
  • [3] Nonlinear dynamic characteristics of a spur gear pair considering extended tooth contact and coupling effect between gear neighboring teeth
    Li, Zhengfa
    Chen, Zaigang
    Zhai, Wanming
    NONLINEAR DYNAMICS, 2023, 111 (03) : 2395 - 2414
  • [4] RELATIONSHIP BETWEEN LIMITING CONTACTING STRESSES AND SURFACE HARDNESS OF GEAR-TEETH AT DIFFERENT SPEEDS
    GALPER, RR
    NACHINKI.VP
    RUSSIAN ENGINEERING JOURNAL, 1972, 52 (10): : 34 - 35
  • [5] Relationship between uneven tooth contact loading and surface durability in flexible gear designs
    Harrop, J.F.
    Tam, A.
    Tribology Series, 1988, 14
  • [6] Tooth surface contact temperature of spur-face gear drive in point contact considering heat flow distribution
    Zhu, Lingyun
    Guo, Qingfu
    Xu, Bo
    Gou, Xiangfeng
    International Journal of Heat and Fluid Flow, 2025, 112
  • [7] Relationship between landscape characteristics and surface water quality
    Chang, C. L.
    Kuan, W. H.
    Lui, P. S.
    Hu, C. Y.
    ENVIRONMENTAL MONITORING AND ASSESSMENT, 2008, 147 (1-3) : 57 - 64
  • [8] Relationship between landscape characteristics and surface water quality
    C. L. Chang
    W. H. Kuan
    P. S. Lui
    C. Y. Hu
    Environmental Monitoring and Assessment, 2008, 147 : 57 - 64
  • [9] Understanding the Relationship between Surface Quality and Chip Morphology under Sustainable Cutting Environments
    Gunay, Mustafa
    Korkmaz, Mehmet Erdi
    MATERIALS, 2024, 17 (08)
  • [10] Calculation of Tooth Surface Contact Stress and Tooth Root Bending Stress of the Asymmetric Gear with Double Pressure Angles Meshing Beyond the Pitch Point Based on Friction Between Teeth
    Li, Xiu-Lian
    Sze, Kam-Yim
    Xu, Xu-Song
    Liu, Wei
    Shi, Xiao-Fang
    Wang, Xian-Wei
    Sun, Hong-Tao
    Journal of the Chinese Society of Mechanical Engineers, Transactions of the Chinese Institute of Engineers, Series C/Chung-Kuo Chi Hsueh Kung Ch'eng Hsuebo Pao, 2020, 41 (03): : 275 - 287
123