Surface roughness measurement in turning carbon steel AISI 1045 using wiper inserts

被引：67

作者：

Esteves Correia, A. ^{[2
]}

Paulo Davim, J. ^{[1
]}

机构：

[1] Univ Aveiro, Dept Mech Engn, P-3810193 Aveiro, Portugal

[2] Polytech Inst Viseu, Sch Technol, Dept Mech Engn & Ind Management, P-3504510 Viseu, Portugal

来源：

MEASUREMENT | 2011年 / 44卷 / 05期

关键词：

Surface roughness measurement; Wiper inserts; Turning; High feed rate; NEURAL-NETWORK; PREDICTION; SYSTEM;

D O I：

10.1016/j.measurement.2011.01.018

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Surface roughness of the workpiece is an important parameter in machining technology. Wiper inserts have emerged as a significantly class of cutting tools, which are increasingly being utilized in last years. This study considers the influence of the wiper inserts when compared with conventional inserts on the surface roughness obtained in turning. Experimental studies were carried out for the carbon steel AISI 1045 because of its great application in manufacturing industry. Surface roughness is represented by different amplitude parameters (R(a), R(zD), R(3z), R(p), R(t), R(a)/R(q), R(q)/R(t), R(a)/R(t)). With wiper inserts and high feed rate it is possible to obtain machined surfaces with R(a) < 0.8 mu m (micron). Consequently it is possible to get surface quality in workpiece of mechanics precision without cylindrical grinding operations. (C) 2011 Elsevier Ltd. All rights reserved.

引用

页码：1000 / 1005

页数：6

共 50 条

[1] Empirical Determination of Roughness Parameters using Wiper Tool Inserts in Finish Turning of AISI 4140
Geier, M.
Souza, A. J.
[J]. MATERIALS, INDUSTRIAL, AND MANUFACTURING ENGINEERING RESEARCH ADVANCES 1.1, 2014, 845 : 929 - 933
[2] Hard turning of AISI 52100 using PCBN wiper geometry inserts and the resulting surface integrity
Guddat, J.
M'Saoubi, R.
Alm, P.
Meyer, D.
[J]. 1ST CIRP CONFERENCE ON SURFACE INTEGRITY (CSI), 2011, 19
[3] Comparative assessment of wiper and conventional ceramic tools on surface roughness in hard turning AISI 4140 steel
Elbah, Mohamed
Yallese, Mohamed Athmane
Aouici, Hamdi
Mabrouki, Tarek
Rigal, Jean-Francois
[J]. MEASUREMENT, 2013, 46 (09) : 3041 - 3056
[4] On the wear of coated carbide inserts in high-speed turning of AISI 1045 steel
Balaji, A
Varghese, V
Jayal, AD
[J]. TRANSACTIONS OF THE NORTH AMERICAN MANUFACTURING RESEARCH INSTITUTION OF SME 2005, VOL 33, 2005, 2005, 33 : 557 - 564
[5] THE INFLUENCE OF THE CONDITIONS OF EMULSION MIST FORMATION ON THE SURFACE ROUGHNESS OF AISI 1045 STEEL AFTER FINISH TURNING
Feldshtein, Eugene
Jozwik, Jerzy
Legutko, Stanislaw
[J]. ADVANCES IN SCIENCE AND TECHNOLOGY-RESEARCH JOURNAL, 2016, 10 (30): : 144 - 149
[6] Assessment of CVD- and PVD-Coated Carbides and PVD-Coated Cermet Inserts in the Optimization of Surface Roughness in Turning of AISI 1045 Steel
Paese, Evandro
Geier, Martin
Rodrigues, Fabiano R.
Mikolajczyk, Tadeusz
Mia, Mozammel
[J]. MATERIALS, 2020, 13 (22) : 1 - 26
[7] Modelling of surface finish and tool flank wear in turning of AISI D2 steel with ceramic wiper inserts
Ozel, Tugrul
Karpat, Yigit
Figueira, Luis
Davim, J. Paulo
[J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2007, 189 (1-3) : 192 - 198
[8] Study of surface roughness and flank wear in hard turning of AISI 4140 steel with coated ceramic inserts
Sudhansu Ranjan Das
Debabrata Dhupal
Amaresh Kumar
[J]. Journal of Mechanical Science and Technology, 2015, 29 : 4329 - 4340
[9] Study of surface roughness and flank wear in hard turning of AISI 4140 steel with coated ceramic inserts
Das, Sudhansu Ranjan
Dhupal, Debabrata
Kumar, Amaresh
[J]. JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 2015, 29 (10) : 4329 - 4340
[10] Effect of cutting parameters on surface roughness using orthogonal array in hard turning of AISI 1045 steel with YT5 tool
Xiao, Zeqing
Liao, Xiaoping
Long, Zhenhong
Li, Ming
[J]. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2017, 93 (1-4): : 273 - 282

← 1 2 3 4 5 →