Design and Fabrication of Waveguide Slot Antenna Using 3D Printing for 5G Application

被引：0

作者：

Hanoosh, Hatem O. ^{[1
,2
]}

Rahim, M. K. A. ^{[1
]}

Murad, N. A. ^{[1
]}

Hussein, Yaqdhan M. ^{[1
,3
]}

机构：

[1] Univ Teknol Malaysia UTM, Sch Elect Engn, Adv RF & Microwave Res Grp ARFMRG, Fac Engn, Skudai 81310, Malaysia

[2] Imam Jaafar Al Sadiq Univ, Coll Informat Technol, Dept Comp Tech Engn, Samawah 66001, Al Muthanna, Iraq

[3] Al Furat Al Awsat Tech Univ, Informat Technol & Commun ITC, Sammawah, Iraq

来源：

APPLIED COMPUTATIONAL ELECTROMAGNETICS SOCIETY JOURNAL | 2022年 / 37卷 / 11期

关键词：

3D printing; add electromagnetic modeling and simulation; multi-beams; slots antenna; waveguide; MILLIMETER-WAVE; ARRAY ANTENNA; BAND;

D O I：

10.13052/2022.ACES.J.371107

中图分类号：

TM [电工技术]; TN [电子技术、通信技术];

学科分类号：

0808 ; 0809 ;

摘要：

- This research constructs a 26 GHz waveguide slot antenna with decent gain. The application of millimeter-wave requires high bandwidth and gain to increase the traffic and users for millimeter-wave and 5G technology. The application of millimeter waves requires a high gain and bandwidth to achieve the requirements of traffic and users increasing for 5G technology and existing millimeter-wave. High-gain and power handling uide structures which are two waveguide antennae and and fabricated by a 3D printer. The tilt technique has for use with millimeter waves.

引用

页码：1162 / 1169

页数：8

共 50 条

[1] On The Use of 3D Printing Technique for 5G mmWave Antenna Development
Maulana, Muhammad Farhan
Zulfi
Sulistyaningsih
Darwis, Fajri
Desvasari, Winy
Munir, Achmad
[J]. 2024 15TH GLOBAL SYMPOSIUM ON MILLIMETER-WAVES & TERAHERTZ, GSMM, 2024, : 39 - 41
[2] Substrate Integrated Waveguide Cavity slot Antenna at millimeter wave for 5G application
Hussain, Yaqdhan Mahmood
Rahim, Mohamad Kamal A.
Murad, Noor Asniza
Hanoosh, H. O.
Keriee, Hussam Hamid
[J]. 2021 INTERNATIONAL SYMPOSIUM ON ANTENNAS AND PROPAGATION (ISAP), 2021,
[3] Design, fabrication, and testing of a helical antenna using 3D printing technology
Ghassemiparvin, Behnam
Ghalichechian, Nima
[J]. MICROWAVE AND OPTICAL TECHNOLOGY LETTERS, 2020, 62 (04) : 1577 - 1580
[4] Design of 3D printed lens antenna for 5G applications
Shalini, Goutha Reddy
Krishna, D. Rama
Karthikeya, G. S.
Koul, Shiban K.
[J]. 2021 IEEE MTT-S INTERNATIONAL MICROWAVE AND RF CONFERENCE (IMARC), 2021,
[5] Design of Slot Coupled Rectangular Dielectric Resonant Antenna For 5G Application
Abdullah, R.
Ja'afar, H.
Jaafar, A. N.
Jamaluddin, M. H.
Aris, M. A.
Redzwan, F. N. M.
[J]. 2019 IEEE ASIA-PACIFIC CONFERENCE ON APPLIED ELECTROMAGNETICS (APACE), 2019,
[6] Design and fabrication of antennas using 3D printing
Bjorgaard, Jason
Hoyack, Michael
Huber, Eric
Mirzaee, Milad
Chang, Yi-Hsiang
Noghanian, Sima
[J]. Progress In Electromagnetics Research C, 2018, 84 : 119 - 134
[7] Enhancing 5G antenna performance by using 3D FSS structures
Guidoum, Ferial
Tounsi, Mohamed Lamine
Vuong, Tan-Phu
Ababou, Noureddine
Yagoub, Mustapha C. E.
[J]. INTERNATIONAL JOURNAL OF RF AND MICROWAVE COMPUTER-AIDED ENGINEERING, 2021, 31 (08)
[8] 5G mm-Wave MIMO Antenna with Beam Switching Capabilities Fabricated Using 3D Printing
Alkaraki, Shaker
Kelly, James
Gao, Yue
Stremsdoerfer, Samuel
Gayets, Edouard
[J]. 2020 IEEE INTERNATIONAL SYMPOSIUM ON ANTENNAS AND PROPAGATION AND NORTH AMERICAN RADIO SCIENCE MEETING, 2020, : 1545 - 1546
[9] Empty Substrate Integrated Waveguide Slot Antenna Array for 5G Applications
Khan, Zia Ullah
Abbasi, Qammer H.
Belenguer, Angel
Loh, Tian Hong
Alomainy, Akram
[J]. 2018 IEEE MTT-S INTERNATIONAL MICROWAVE WORKSHOP SERIES ON 5G HARDWARE AND SYSTEM TECHNOLOGIES (IMWS-5G), 2018,
[10] A 5G MIMO Antenna Manufactured by 3-D Printing Method
Li, Yong
Wang, Chunting
Yuan, Hongwei
Liu, Ning
Zhao, Hualong
Li, Xiali
[J]. IEEE ANTENNAS AND WIRELESS PROPAGATION LETTERS, 2017, 16 : 657 - 660

← 1 2 3 4 5 →